6.5 Inch Full Sensor Kit Race Car Dashboard Digital LCD Display (
DO904 )
KEYS:
A. LED
(Four LED light is on each top side of the frame and will light
according to the different RPM. The light color is GREEN, GREEN,
YELLOW, RED from bottom to top.)
B. Upper Select Key
(choose and adjust the number value)
C. Lower Select Key
(choose and adjust the number value)
D. Menu Key
(set up MENU and confirm functions)
E. Exit Key
(exit or cancel the setting.)
F. Power Plug
(there are two power plugs on the display, one is on the left,the
other is on the right. You can connect Mini USB to either plug.
NOTE: PLEASE USE SPECIAL POWER CABLE IN DO903DASHBOARD KIT. OTHER
STANDARD MINIUSB IS NOT SUITABLE FOE THE DASHBOARD. IF USE, WILL
DAMAGE THE DASHBOARD.)
DISPLAY:
1, Engine RPM
2, Speed
3, Oil Pressure
4, Air /Fuel Ratio
5, Turbo
6, Coolant Temperature
7, Voltage
8, Time
9, Multi-purpose Display Section
| 1 | Display | 8 | Accessories(Boost pipe,T -Fitting,Air Filter) |
| 2 | the Data Processing Unit(DPU) | 9 | EXT. Temp Sensor |
| 3 | Power Wire A | 10 | EXT.Temp Sensor Adapter |
| 4 | Power Wire B | 11 | Sensor Wires |
| 5 | Oil Pressure Sensor | 12 | Monitor Stand |
| 6 | Water Temp Sensor& Oil Temp Sensor | 13 | DPU Installation Panel |
| 7 | Boost Gauge Sensor | | |
1. The dashboard consists of the Monitor(1), the Data Processing
Unit(DPU)(2), and several different Types of Sensors.here are two
types of Power Cords. Power Cord A(3) can be plugged into the car's
cigarette lighter. Power Cord B(4) can be integrated directly into
the car's circuit. The DPU receives and processes data
transmissions from the Sensors,and sends the processed data to the
Monitor via Bluetooth.
2. The Monitor has two sockets, one is on the left edge and the
other is on the right edge, only one socket can be connected to a
cord at a time. The sockets are Mini USB sockets. (IMPORTANT: This
socket is incompatible with normal Mini USB cords, specialized
cords must be used. Usage of incompatible cords may damage the
device.)
3. The Monitor has four buttons, positioned on the left and right
side, two on each side. Upper-left button reads "Menu/OK", it is
used to bring up the Settings Menu, execute the "confirm" action
and other functions. Lower-left button reads "Exit/Cancel", it is
used to Exit the Settings Menu and execute the "cancel" action.
Upper and Lower-right buttons are “ ”,“ ” buttons respectively.
They are used to scroll through options and altering the options
when they
are selected.
4. The light sensor is positioned on the top middle of the Monitor.
The backlight of the screen will change in response to the
brightness of the environment, there are a total of 4 brightness
levels. Two symmetrical rows of LED lights are positioned at the
front of tilted edges on the Monitor, they will turn on from bottom
up as the RPM increases. The colour of the four pairs lights are
"green", "green", "yellow", "red".
5. Before connecting to power, start the engine of the car. After
connecting to power, the Monitor will search for the DPU
automatically and establish connection.
