Lightweight network surge protectors protect network equipment from
surge damage
Model: Trss-rj11 / 45
colour:white
Authentication:CE ECM
Product Details
The TRSS-RJ45/8 type network lightning arrester is an overvoltage
protector designed for ETHERNET network. It can be used for
servers, workstations, HUB and other RJ45 interfaces. For example,
the input / output terminal of EPRJ45-5/100M is RJ45 interface, and
its transmission signal rate can reach 100Mbps or 1000Mbps. It is
mainly used for lightning protection measures against network
system. To prevent high voltage from causing short circuit and
combustion and explosion is the important manifestation of internal
lightning protection.
Product features
1. installation and use of convenient novice can also be easy to
install
2. PCB is designed with microstrip, good isolation, low line
disturbance
3. extremely low online resistances reduce unnecessary attenuation
of signal intensity and increase the distance of signal
transmission to the maximum.
4. the product has many interfaces and is easy to use. It doesn't
need to worry about the number of interfaces.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Working principle of product
The working principle of network lightning arrester is to present
high resistance open state with a low voltage, low resistance short
circuit state at high pressure, and a combination of over voltage
protection electronic devices which can withstand hundreds of
amperes and large current in parallel on power supply line and
signal transmission line. When encountering lightning and high
voltage and high current, it will appear short circuit immediately,
and at the same time, the total power switch will be disconnected,
so that the computer equipment will be protected.
Use of attention
1. grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
2. the grounding of the signal protector should be connected to the
grounding grid through the electronic switch.
3. connect the grounding wire of the lightning protector with the
ground wire of the lightning protection system.
4. this product needs no special maintenance. The lightning
arrester should be checked regularly, especially in the
thunderstorm season and the whole thunderstorm period. When the
system fails to doubt the lightning arrester, the lightning
arrester can be dismantled and rechecked. If the system is restored
to normal after the restoration to the state before use, it
indicates that the lightning arrester has been damaged and must be
replaced immediately.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
been designing new products to meet the RoHS directive since 2006.
Thor’s ongoing commitment to RoHS compliance includes continuing
efforts to reduce the presence of hazardous substances in the
design and manufacture of a growing number of popular products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
