Rack type network surge protective device can protect 24 network
cables
Model: Trss-rj11 / 45
colour:white
Authentication: CE ECM
Product introduction
The TRSS-RJ45/8 type network lightning arrester is used to protect
the sensitive high speed communication network line from the damage
caused by the lightning induction voltage, the power interference,
the electrostatic discharge and so on. The signal lightning
arrester adopts the multilevel protection circuit, selects the
world famous brand components and makes use of the advanced
production technology. It has the characteristics of large flow
capacity, low residual pressure level, sensitive reaction, stable
performance, reliable work and so on. It is suitable for railway
communication system, mobile base station, differential station,
hard disk recorder, video surveillance equipment, optical terminal
and other network transmission equipment to avoid overvoltage
damage such as inductive lightning stroke and electrostatic
discharge introduced by the system.
Product features
1. core components are strictly screened, stable performance and
reliable operation.
2. advanced production process and beautiful appearance
3. upgrade transistor is equivalent to 2 diodes
4. self protection voltage is more than self protection, automatic
disconnection and recovery.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Working principle of product
During the operation of the equipment, the lightning arrester will
play a protective role once the abnormal voltage occurs. When the
protected device is running under normal working voltage, the
arrester will not work, and it will be regarded as a circuit for
the ground. Once the high voltage is present and the insulation of
the protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the electrical equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so
that the system can supply electricity normally. The main function
of the lightning arrester is to reduce the voltage value of the
protected equipment through the action of parallel discharge gap or
nonlinear resistance, and to reduce the voltage value of the
protected equipment, so as to protect the power equipment.
The lightning arrester not only can protect the high voltage of the
atmosphere, but also can be used to protect the operation of high
voltage. If there is a thunderstorm, a high voltage will appear and
the electric equipment may be dangerous. At this point, the
arrester will play a role to protect the power equipment from
damage. The most important function of the arrester is to limit the
overvoltage to protect the electrical equipment. Lightning arrester
is a device to make the lightning current flow into the earth, so
that the electrical equipment does not generate high voltage.
Use of attention
1. The lightning protector is connected between the protected
device and the signal channel in series.
2. Connect the grounding wire of the lightning protector to the
ground wire of the lightning protection system.
3. The lightning arrester of the network switch is a series
connection mode.
4. The lightning protector of the network switch should match the
working voltage of the protected device. When installing, please
connect according to the installation sketch map.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
