Powder Resin Insulation Hot Dip Coating Machine Magneto Stator Fluidized Bed

Magneto Stator Fluidized Bed Powder Resin Insulation Hot Dip Coating Machine WIND-HDP
Magneto motor stator fluidized bed equipment powder resin insulation hot dip coating machine



Design and production reference

Working process

1. Fix the stator (work piece) in the fixture, then put it inside the inductorium

2. Power on the machine, then the induction heater automatically begin working,

the heat time could be set, when set time is reach heater automatically stop,

Normally the heater time is 10s

3. Fetch out the fixture,then dip both side in the power coating station,

the stator is hot, and the fixture is in normal temperature and won’t burn you

4. Dip the fixture in the power coating station both side, the dipping time is

depened on stator stack thickness and powder’s character,

For example,normally one side is 3s, then the other side 2s

5. After dipping, disassemble the fixture clean the fixture using a airgun to

remove the remain power when necessary

6. Collect and put the stators into oven( the machine didn’t have a oven with it),

the oven temperature need reach to 180～200℃ (depended on powder’s character),

keep that temperature for more than 30 minutes


1. Machine is composed of heating,powder coating,powder cleaner and powder recycle system with nice

appearance and reasonable configuration,

the machine frame is made of 1.2mm A3 steel plate

2. High frequency indution heater have the advantage of fast heating, low energy, safety and reliability

3. Air blowing ensure well done in cleaning fixtures

4. Cooling on high frequency induction heater is freezing style water cooler tank, it is well cooling



Machine feature

1. Machine is composed of heating,powder coating,powder cleaner and

powder recycle system with nice appearance and reasonable configuration,

the machine frame is made of 1.2mm A3 steel plate,

2. High frequency indution heater have the advantage of fast heating, low energy, safety and reliability

3. Air blowing ensure well done in cleaning fixtures

4. Cooling on high frequency induction heater is freezing style water cooler tank, it is well cooling



Machine configuration

Machine dimension L2100×W1720×H2100 mm

1. 40KW high frequency induction heater 1PC With Φ120mm inductorium 1PC

2. Cooling tank 1PC With size L1000×W1000×H1000mm

3. 0.37KW Cooling water pump

4. Powder coating chamber 1SET

5. Powder recycle system (on back side of powder coating chamber) 1PC



Power composition

Power : 12KW 380V±10%,50HZ

Compressed air : 0.3 m³/min 0.6Mpa



Please click below picture to view video

The weight of armature is related to the lifting fixture for dipping the workpiece (stator rotor orarmature )

to fluidized powder and lifting up(which controlled by cylinder)

The pre-heat, coating priciple will be similar as the video showed

https://youtu.be/MxBkOsVhDz4

The curing oven will be similar as this video last part,

https://www.youtube.com/watch?v=88ivvZ-Q1J0

Shanghai Wind Automation Equipment Co.,Ltd supply motor automation solution for global motor manufacturers. Setted up in the year 2010 by Senior Engineer Mr.Wang who involve in electric motor filed since 1998. Through continuous innovation and participating in globalization, it has now developed into a large enterprise that integrates R&D, production and sales to provide motor solutions for customers worldwide.

Shanghai Wind Automation built a 3C business system

1.Customized Machinery

​   Provide armature,stator motor manufacturing mchinery,

   including stand along machine, fully-auto complete production line

​   

2.Characteristic Component

  Supply the full range of motor components such as commutator, magnet, fan, motor cover,etc.

3.Comprehensive Service

   Provide motor project technical support and consulting

Centered on Shanghai, the company has formed four production bases in the Yangtze River Delta city group and supplied over 20 countries including USA, Mexico,Brazil, Argentina, Turkey,France,Germany,

Czech Republic,Romania,India, Bangladesh and So on.

Our objective is to provide turn-key motor manufacturing automation equipment with no limitation

as free as the Wind, reduce the labor cost and free the human being operator,

make the life easier and more enjoyable.