High Voltage Pulse Oven Ignition Unit 01_1_4A_IGR01-4
Description:
The electronic components (resistor and diode), coils, epoxy
potting, and the ceramic head are all with good high temperature
resistance and good high voltage resistance, so we could make sure
that our product could stably work under the high temperature work
environment. In the meanwhile, we use the advanced vacuum
encapsulation technology to ensure there were no bulbs in the body
of product. Then we could guarantee that our ignition units would
continuously and stably generate pulse sparks for long time.
Specification:
| TYPE | HIGH-VOLTAGE PULSE |
| APPERANCE STYLE | A-STYLE |
| PRODUCT CODE | IGR01 |
| OUTLET QUANTITY | 4/6 |
| WORKING VOLTAGE | AC 110~127V / AC 220~240V |
| WORKING FREQUENCY | 50 / 60 HZ |
| NOMINAL OUTPUT POWER | 0.6VA |
| OUTPUT PULSE VOLTAGE | > 18KV |
| PULSE FREQUENCY | 1~2 / 3~6 / 6~9 / >9 HZ |
| PULSE SPARK LENGTH | >6MM |
| GLOW WIRE TEST | GWT 850 & GWIT 775 (IEC60335-1 PART 30.2) |
| FLAME CLASS | UL-94-V0 |
| INPUT TERMINAL | FASTON 6.3 X 0.8 |
| OUTPUT TERMINAL | FASTON 2.8 X 0.8 |
| GROUND CONNECTOR | YES |
Applications:
1. Freestanding Oven
2. Gas Cooker
3. Other Home Appliances
Easy to install, clean, and maintenance
We set a elastic snap joint device on the igniter unit, so you
could easily install it in the gas cooker or remove it from the gas
cooker. On the appearance of gas burner, we usually set the special
position to install the spark plug. The appearance size of the
spark plug is suitable for the install hole. So you could easily
install the spark plug in the gas burner.
The igniter unit is a sealed box, it could keep things like dust
out.And the surface of the product is very smooth, it is convenient
for clean and maintenance.
Full range of product
1) Igniter unit
A install mode is a standard mode;
D install mode is a special mode for Europe market;
H install mode is a compact mode for Middle-east market, especially
in Turkey market.
Stable working quality and long lifetime service
1) We choose the best electronic components to manufacture the
igniter. All of these components which produced by famous
electronic components factories all could continuously stably work
for long time.
2) In our production process, we use the advanced vacuum
encapsulation technology and machines to guarantee the vacuum
degree of igniter unit. The good vacuum degree could guarantee the
long working lifetime of the igniter unit
