High Temperature Working Stably D-series Igniter Unit
With Installation Wings For Gas Cooker
Description:
The general ignition combination consists of igniter unit and spark
plug. The
igniter unit is a pulse high-frequency oscillator which consists of
some electronic
components, including primary coils, secondary coils, resistor,
diode, and so on.
During the operation of igniter unit, the regular input alternating
voltages, like AC
110V or AC 240V, would be boosted to the output high-frequency
voltage which
more than 18KV. The output high-frequency voltage would generate
stable and
continuous pulse spark through the spark plug components. Then the
spark would
ignite the gas on the burner.
The electronic components (resistor and diode), coils, and epoxy
pottingare all
with good high temperature resistance and good high voltage
resistance, so we
could make sure that our product could stably work under the high
temperature
work environment. In the meanwhile, we use the advanced vacuum
encapsulation
technology to ensure there were no bulbs in the body of product.
Then we could
guarantee that our ignition units would continuously and stably
generate pulse
sparks for long time.
Specifications:
| ITEM | INFORMATION |
| RATED VOLTAGE | AC 110~240V |
| RATED FREQUENCY | 50/60HZ |
| RATED OUTPUT POWER | 0.6VA |
| WORKING TEMP. | -10~120 ℃ |
| OUTLET QTY. | 2/4/6/8 OUTLETS |
| OUTPUT PULSE VOLTAGE | > 18KV |
| SPARK FREQUENCY | 1~2HZ/3~6HZ/ 6~9HZ/>9HZ |
| SPARK DISTANCE | > 6mm |
| HOUSING MATERIAL | PA66+GF / RED OR BLUE COLOR |
| GLOW WIRE TEST | GWT 750 |
| FLAME CLASS | UL94 V0 |
| TERMINAL MATERIAL | GALVANIZED STEEL |
| INPUT TERMINAL PIN | 0.8X6.3 FASTON |
| OUTPUT TERMINAL PIN | 0.8X2.8 FASTON |
| GROUND CONNECTOR PIN | YES |
Advantages:
1. Stable working quality and long lifetime service
1) We choose the best electronic components to manufacture the
igniter. All of these
components which produced by famous electronic components factories
all could continuously
stably work for long time.
2) In our production process, we use the advanced vacuum
encapsulation technology and
machines to guarantee the vacuum degree of igniter unit. The good
vacuum degree could
guarantee the long working lifetime of the igniter unit
2.Working stably under high temperature
The raw materials of the parts for ignition combination all have
good high temperature
resistance properties. So the ignition combination could work
stably under the high
temperature, at least 200 degrees centigrade.
| COMPONENTS | RAW MATERIAL | TEMP. RESISTANCE |
| Housing, coil frame | nylon (PA66) | >200 ℃ |
| Enameled wire of coil | Copper+teflon | >200 ℃ (Teflon) |
| terminal | Galvanized steel | >1500 ℃ |
| Potting material of igniter unit | EPOXY | >200 ℃ |
| Head part of spark plug | 95% AL2O3 ceramic | >1600 ℃ |
| Wire of spark plug | Copper+teflon | >200 ℃ (Teflon) |
3.Good safety properties
1) Good high voltage resistance.
All of the shielding parts have good insulation properties.
| COMPONENTS | RAW MATERIAL | VOLTAGE. RESISTANCE |
| Housing | nylon (PA66) | > AC 600V |
| Potting material of igniter unit | EPOXY | > AC 600V |
| Head part of spark plug | 95% AL2O3 ceramic | > 18KV DC |
| Wire of spark plug | Copper+teflon | > 18KV DC |
2) Good heat and fire resistance.
All of the non-metallic material could pass the heat and fire
resistance test of GWT 750 and
GWIT 775.
4. Easy to install, clean, and maintenance
We set a elastic snap joint device on the igniter unit, so you
could easily install it in the gas
cooker or remove it from the gas cooker. On the appearance of gas
burner, we usually set
the special position to install the spark plug. The appearance size
of the spark plug is suitable
for the install hole. So you could easily install the spark plug in
the gas burner.
The igniter unit is a sealed box, it could keep things like dust
out.And the surface of the
product is very smooth, it is convenient for clean and maintenance.
Applications:
1. Freestanding Oven
2. Freestanding Gas Cooker
3. Other Home Appliances
Product List:
| Code | Mode | Outlets | Electrical Datas | Ground | Spark Frequency | Note |
| IGR04-221-03-A1 | D-Style | 2 | AC220~240V/ 50/60Hz | No | 6~9Hz | PA66/Red/V0 |
| IGR04-421-01-A1 | D-Style | 4 | AC220~240V/ 50/60Hz | No | 1~2Hz | PA66/Red/V0 |
| IGR04-421-02-A1 | D-Style | 4 | AC220~240V/ 50/60Hz | No | 3~5Hz | PA66/Red/V0 |
| IGR04-421-03-A1 | D-Style | 4 | AC220~240V/ 50/60Hz | No | 6~9Hz | PA66/Red/V0 |
| IGR04-421-04-A1 | D-Style | 4 | AC220~240V/ 50/60Hz | No | > 9Hz | PA66/Red/V0 |
| IGR04-621-03-A1 | D-Style | 6 | AC220~240V/ 50/60Hz | No | 6~9Hz | PA66/Red/V0 |
| IGR04-821-03-A1 | D-Style | 8 | AC220~240V/ 50/60Hz | No | 6~9Hz | PA66/Red/V0 |
