Cold Balance Control System Programmable Cycling Temperature
Humidity Climatic Test Chamber
Model Selection:
| Model | Temp and Humidity Range | Internal Dimension
(W x H x D) cm | Exterior Dimension
(W x H x D) cm |
| QTH-V80A | 0℃～﹢150℃ 20%～98%RH | 40x50x40 | 60x110x95 |
| QTH-V150A | 50x60x50 | 70x120x105 |
| QTH-V225A | 50x75x60 | 70x135x115 |
| QTH-V416A | 70x85x70 | 90x145x125 |
| QTH-V800A | 100x100x80 | 120x160x135 |
| QTH-V1000A | 100x100x100 | 120x160x155 |
| QTH-V80B | -20℃～﹢150℃ 20%～98%RH | 40x50x40 | 60x110x95 |
| QTH-V150B | 50x60x50 | 70x120x105 |
| QTH-V225B | 50x75x60 | 70x135x115 |
| QTH-V416B | 70x85x70 | 90x145x125 |
| QTH-V800B | 100x100x80 | 120x160x135 |
| QTH-V1000B | 100x100x100 | 120x160x155 |
| QTH-V80C | -40℃～﹢150℃ 20%～98%RH | 40x50x40 | 60x110x95 |
| QTH-V150C | 50x60x50 | 70x120x105 |
| QTH-V225C | 50x75x60 | 70x135x115 |
| QTH-V416C | 70x85x70 | 90x145x125 |
| QTH-V800C | 100x100x80 | 120x160x135 |
| QTH-V1000C | 100x100x100 | 120x160x155 |
| QTH-V80D | -70℃～﹢150℃ 20%～98%RH | 40x50x40 | 60x110x95 |
| QTH-V150D | 50x60x50 | 70x120x105 |
| QTH-V225D | 50x75x60 | 70x135x115 |
| QTH-V416D | 70x85x70 | 90x145x125 |
| QTH-V800D | 100x100x80 | 120x160x135 |
| QTH-V1000D | 100x100x100 | 120x160x155 |
| Remark: 20%～98%RH is standard humidity range, support custom made
10%～98%RH Or 5%～98%RH |
| Support custom made dimension |
Technical Specifications:
| Control Mode | Balanced Temperature and Humidity Control System |
| Operating Temp. & Humid. Range | +5deg ~ +35deg; <85%R.H. |
| Temp. range | A=0deg, B=-20deg, C=-40deg, D=-70deg ~ +100deg(150deg) |
| Humid. range | 20% ~98%R.H.
(Optional: 5%~98%R.H.) |
| Temp. & Humid. fluctuation | ±0.5deg; ±2.5%R.H. |
| Temp. & Humid. uniformity | ≤2.0deg; ≤3%R.H. |
| Temp. & Humid. Deviation | ≤1.0deg; ≤2%R.H. |
| Temp. Heating Time | 0deg ~ +100degwithin 30min; -20deg ~ +150degwithin 45min |
| Temp. Cooling Time | 20deg ~ -40degwithin 60min; 20deg ~ -70degwithin 85min |
| Power Supply | AC380V, 50/60HZ, Three-phase (Specified by User) |
| Exterior Material | stainless steel with baking paint |
| Interior material | SUS304# Stainless steel |
| Insulation material | Rigid Polyurethane foam |
| Refrigeration system | Mechanical cascade refrigeration system; Fin type radiator |
| Circulation system | Mechanical convection system |
| Humidification Water Supply | Automatic water regulating, recoverable supply system, water shortage alarm system |
| Water quality | Distilled water only, 20L Water tank capacity |
| Controller | Touch Screen Controller |
| Safety devices | Overheat protector Switch, Compressor overload protector Switch,
water shortage protector Switch, Humidifier protector Switch, Fault
alarm system |
| Accessories | Viewing window, Chamber Illumination, Cable port ø50mm,
Product shelf slides 2 pieces, universal casters
Touch screen controller |
Main Features:
1, Touch screen controller is designed to save chamber programming
and setup time with temperature limit and alarm to protect your
product.
2, Safety relay connection is provided to protect your device under
test by removing power to it when the chamber is not running.
3, Chamber exterior material is stainless steel with
environmentally baking paint resists corrosion and provides impact
resistance. Interior material is SUS304# stainless steel with
excellent heat resistance and easy to clean.
4, RS-232 communications is for computer connection, programming
can be set on computer by software, monitor testing process and
automatically execute power on/off functions.
5, Fog-free viewing window and interior light makes viewing
workspace freely and observe the test under best conditions.
6, Adjustable product shelf slides out for easier product access.
Shelf design is non-tipping and supports large product loads.
7, Left side of chamber with diameter 50mm cable port for power-on
test.
8, Optional electronic humidity sensor is used on all test chambers
for accuracy and minimal maintenance.
Unique shape with high performance material, used to testing
aerospace products, electronic instrumentation, materials,
electrical and electronic products and various electronic
components.
Temperature Humidity Test chambers are applicable for quality
inspection for all types of electronic products, electric
appliance, and products from communication ,instruction ,
automobile, plastic, metal, food, chemical, building materials,
medical and aerospace industries.
Temperature and humidity test chambers are available as standard
products in a variety of sizes to suit your needs. Our
environmental test chambers are often used for steady-state
stability testing, basic temperature cycling and accelerated stress
testing.
Vertical Test Chambers conform following standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing
method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing
method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing
method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing
method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method
Optional Accessories:
Cable Port: Size of cable port is available for 100mm;
Water purifier RO 80: Continuously provide purified water for
humidifying heater and wet-bulb;
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures
precise control of low humidity (10C, 15%RH) for electrostatic
reliability tests;
Defrosting Device: The chamber automatically detects and melts the
frost on the evaporator when operating below 0deg in order to allow
continuous operation;
Electronic humidity sensor: Precision Humidity Sensor with
stainless steel protection tube.
