Fully Automatic Fence Mesh Multipoint Welding Machine One Person
Operation
description
1. Welder gantry structure, the effective welding machine working
space 900mm, suitable for welding the maximum width of 700mm
2 according to the user's requirements, the welder beam device 3 or
4 welding cylinder. Corresponding to the cylinder in the lower beam
device 3 or 4 down the cylinder. Welding cylinder lateral position
adjustable.
3. Each group welding cylinder can be set separately welding
parameters (welding current, welding time, pre-pressure time,
maintenance time) and so on.
4. Secondary use of three-phase full-wave rectifier power supply,
high power factor, current output strong. Energy saving.
5. Welder control using all-digital programmable logic controller
(PLC) control, the current output is stable, reliable work. Low
failure rate.
6. Transformers, primary SCR and secondary rectifier bridge,
welding electrodes and other 3-way working system were set up
strong water cooling system to ensure that the welding machine can
work stably for a long time
7. Welding cylinder, welding valve selection of high-quality fast
devices to ensure that row welding machine can work continuously
and steadily
Features
1, the upper electrode using cylinder pressure, pressure adjustment
convenient and accurate;
2, one can be completed evenly welding multiple welds;
3, can be adjusted head pressure drop and rise speed, ease the
pressure on the workpiece impact, but also reduce noise;
4, the secondary conductor using the upper insulation, insulation
performance is stable and reliable;
5, the main circuit using high-power thyristor components, the
output power supply strong, stable and reliable;
6, operation by the foot switch control, with high productivity,
low labor intensity;
7, for metal mesh, mesh welding.
Specification
| Fully Automatic Fence Mesh Multipoint Welding Machine One Person
Operation |
| Input power | 380V 50Hz |
| Max. width | 2500mm |
| Line wire space | 50-300mm |
| Cross wire space | ≥25mm |
| Wire diameter | 2.5-6.0mm |
| Rated capacity | 125kva*6 |
| Welding point No. | 48 |
| Motor power | 4.0KW |
| Feed line wire | Pre-cut wire |
| Feed cross wire | Pre-cut wire |
| Welding speed | 30-50 times/min |
| Weight | 4T |
| Can be customized according to customer requirements. |
