Concrete Panel / Eps Sandwich Mgo Wall Sheet Making Machine With
High Speed
High speed lightweight concrete panel / eps sandwich mgo wall sheet
making machine
EPS sandwich wall panel mgo board making machine
1. length of the production line:38000mm × 2200mm × 2800mm
2. Total Weight: about 24000KG
3. Main Power: 35KW
4. Working Speed: 4m/min
5. Material : 45# steel, quenched HRC 58-62
6. Electric Standard: 380V / 50 HZ / 3 PHASE
7. Feeding Width: 1150mm /1200m
8. Effective Width: 950mm
9. Thickness of the coil: 0.3-0.8mm
10. Density of EPS:18KG/M3
11. Output: 600,000m2 per year
12. Thickness of the material:0.4-0.8mm
13. Width of Material:1200mm Max
14. Core Material:EPS Board
15. Production line speed:3-5m/min
16. Production width:1000mm/960mm
17. Production thickness:50mm-150mm
18. EPS Sandwich panel machine is made up of color of tiles and
core of EPS
19. Application: Public construction, roof and wall of workshop,
building, both etc
20. Function:wall panel ,roof panel
21. Characteristic:quick construction ,everlasting,beautiful
I. Detaild of the production line
| Required Raw Material | Magnesium Oxide Board is made of filling materials, such as sawdust
or all kinds of crushed plant straw (you can select any one kind )
and several chemical raw materials which are token as modified
material after special technology. | | Technical Index for finished board | 1. Oxygenic index%: 90 2. Level combustion: SO 3. Vertical combustion: SO 4. Water content rate: 10.9% 5. Capacity: 1.15g/cm3 6. Static bending intensity: 169.46Mpa 7. Density: T/ m3 1.13 8. Water resistance: Without chalking for 24 hours and there is no
change on surface 9. No Three-wastes (waste water, waste gas and waste residue), no
pollution and environmental protection | | Structure Principle for Machine | Magnesium Oxide Board Machine with fashionable design, reasonable
structure, stable running manufactured board of even thickness in
large production once through double- roller-extruding technology.
This production line is equipped with shaking device which remove
inside and outside air bubble, so our board is more compact. In
addition, we use the no-woven cloth as the separating film to
increase the toughness and strength of the board. The machine can
be adjusted arbitrarily, and then produce the board with the
thickness of 2-60mm, the biggest width of 1, 300mm and unlimited
length. So you can adjust the thickness of board at will. |
|
|
|
|
II Machine Features
1. High capacity
Normal hollow core wall panel machine can make only ten panels in
one mould, but this machine can make 15 panels at one time.
2. Lower the cost of production
2.1 We use stainless steel for the mould instead of traditional
steel. Steel mould machines need brushing de-molding agent or the
panels can't be taken out. Stainless steel machines don't need
de-molding agent, this can save both labor and material cost for
manufacturers. It can save around 0.1 USD per square meter.
3. The product quality is better.
Panels made by this kind of machine have better quality than other
kinds. The panel will not be deformed. Its surface is smoother than
others.
4. Hydraulic mould closing and opening
IV. FAQ
| Q | How many projects have you installed? |
| A | we have installed over 100projects in domestic and abroad. |
| Q | How many years experience do you have in mgo field? |
| A | Our general engineer has around 20years experience; all others have
over 10years experience. |
| Q: | Do you supply spare parts? |
| A: | Excellent easy broken parts support for buyers. Easy broken parts
guarantee for one year. |
| Q: | Will you provide trainning? |
| A: | The training is free of charge , and our engineer will be on duty
to train your worker. |
| Q: | How will you provide installation&commissioning? |
| A: | Will provide 2~4persons(adjustable according to the degree of
automatic )for installation. |
