Automobile DC Gear Motor Stable Performance 120 240mA No Load
Current D3685PLG
D3685PLG: DC Gearmotors for Automatic Doors,Automobiles,Actuators
and Automated Devices.
Typical Application:
Gearmotor, linear actuator,power tool,automated devices
Features:
Low Noise, Long lifespan, Cost less and Save more for your
benefits.
Motor Technical Data:
| TYPE | Rated
voltage
VDC | No-load
speed
r/min | No-load
current
mA | Rated
speed
r/min | Rated
torque
m.Nm | Output
power
W | Rated
current
A | Stall
torque
m.Nm | Stall
current
A |
| D3685P-1230 | 12 | 3000 | 240 | 2420 | 40 | 10 | 1.3 | 180 | 4.4 |
| D3685P-2430 | 24 | 3000 | 120 | 2540 | 40 | 10 | 0.7 | 220 | 2.9 |
Gear motor Technical Data:
| Reduction ratio | 3.7 | 5.2 | 14 | 19 | 27 | 51 | 71 | 100 | 139 |
| Number of gear trains | 1 | 1 | 2 | 2 | 2 | 3 | 3 | 3 | 3 |
| (L) Length(mm) | 31 | 31 | 38.5 | 38.5 | 38.5 | 48.2 | 48.2 | 48.2 | 48.2 |
| No-load speed (r/min) | 808 | 579 | 214 | 157 | 111 | 59 | 42 | 30 | 21 |
| Rated speed (r/min) | 654 | 467 | 172 | 127 | 89 | 47 | 35 | 25 | 20 |
| Rated torque (mN.m) | 0.14 | 0.19 | 0.5 | 0.68 | 0.97 | 1.8 | 2.4 | 3 | 3 |
mN.m
Max. permissible load in a short time | 1 | 1 | 3.5 | 3.5 | 3.5 | 7.5 | 7.5 | 9 | 9 |
Drawing:
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical
requirements. We will make offer we clearly understand your working
condition and technical requirements.
2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum
order quantity. Normally 1000PCS, however we also accept the custom
made order with smaller quantity with higher expense.
3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of
Analysis / Conformance; Insurance; Origin, and other export
documents where required.
4.What is the average lead time?
For samples, the lead time is about 14 days. For mass production,
the lead time is 30~45 days after receiving the deposit payment.
The lead times become effective when (1) we have received your
deposit, and (2) we have your final approval for your products. If
our lead times do not work with your deadline, please go over your
requirements with your sale. In all cases we will try to
accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or
PayPal: 30% deposit in advance, 70% balance before shipment.
