Ceramic strip Channel Heater With Ceramic Terminal Protecion Cover
Ceramic Channel Strip Heaters introduction
Ceramic Channel Strip Heaters are constructed of specially selected
high quality materials, beginning with the high temperature alloy
resistance wire uniformly coiled and spaced over the width of the
heated length of the strip heater. This controlled coil process and
replacement assures uniform heat distribution over the entire
active surface of the heater. Special care is taken to secure the
stud-type terminal to the high-temperature alloy resistance
contact.
The coiled resistance wire is embedded in a special refractory
Material that possesses excellent heat transfer characteristics and
superior insulation properties. The entire heater assembly is
encased in either stainless or chrome steel sheath and is
compressed under high pressure. The completed assembly is heated
under controlled conditions to bake and semi vitrify the refractory
for a rigid, vibration resistant, heavy-duty heating unit.
Ceramic Channel Strip Heaters can be finned to improve heat
transfer. The fins are specially designed to provide maximum
surface contact for good heat dissipation into the finned cross
sections, thus resulting in rapid heat transfer to the air.
Ceramic Channel Strip Heaters construction
1. Seamless stainless steel sheath and fins
2. Post terminals
3. Ceramic element support
4. Element wire situated in close proximity to outside surface for
maximum heat transfer and minimum internal temperature while
preserving good dielectric qualities.
Ceramic Channel Strip Heaters Features :
1.Watt density: Max 35 w/in²
2.Standard Strip width: 40mm
3.Standard Finn dimension: 65X35mm
4.Maximum Allowable Sheath Temperature:
5.Rust resistant Mild Steel 350°C
6.Stainless Steel 550°C
Applications of Ceramic Channel Strip Heaters:
Dies and mold heating
Autoclaves
Thermoforming
Resistive Load Banks
Food warming
Freeze and moisture protection
Tank and platen heating
Packaging
Ovens
