Water Or Air Cooling Manufacturing Process Die Casting Aluminum
Band Heater
Description
Cast-in heater is a tubular electric heating element for heating
body, and bending molding, into the mold with high quality metal
alloy material for shell in centrifugal cast into various shapes, a
round, flat, rectangular, air-cooled, water-cooled and other
special-shaped etc.. After finishing it and heated body tightly,
Metal casting heater is a kind of high efficiency heat uniformity
division of the heater, thermal conductivity, excellent metal
alloy, ensure the hot surface temperature uniformity, eliminating
equipment hot and cold spots. With long life, good insulation
properties, mechanical properties, corrosion resistance, magnetic
resistance etc.. The outer radiating surface increases thermal
insulation device, within the radiating surface of sintering
infrared which can save 35% of electricity.
Specification
Size | Customized |
Voltage | 120, 240, 480 Special voltage to order |
Wattage | Aluminum 35 watts/sq |
Bronze 50 watta/sq |
Max Temperature | Aluminum 700 deg |
Bronze 1000 deg |
Option | cooling tube |
end fitting |
Cast Materials | Max Operating Temperature |
Aluminum | 371°C |
Bronze/Copper alloys | 769°C |
Iron | 482°C |
Feature
1. High efficiency heat uniformity division of the heater
2. Hot surface temperature uniformity
3. Save 35% of electricity
4. Cast aluminum surface load can reach 2.5-4.5w / cm2, maximum
operating temperature 400-500 °C;
5. Cast copper surface load can reach 3.5-5.0w / cm2, maximum
operating temperature 600-700 °C;
6. Cast iron surface load can reach 4.5-6.0w / cm2, maximum
operating temperature 800-850 °C.
Application
Widely used in Extrusion industries, Injection Moulding , Vaccum
Forming Compression Moulding, etc.
