Electric Material Handling Turntable / Manual Pallet Turntable Well - Balanced

Track Junction Customized Solid Electric Material Handling Turntable on Rail

2. Working Principle

The electric material handling turntable is designed for cross rails to turn with 90 degree in warehouse and plants. Its working principle is that there are also rails installed on the turntable, when the rail transfer cart runs on the turntable, the turntable can be rotated automatically or manually until precisely connecting with the destination rail, then the transfer cart runs on the vertical rail. The turntable is suitable for many occasions, such as ring rails, vertical rails, and crossing rails etc. The turntable system run steadily and has features as high rail jointing accuracy and can meet full automatic electrical operation.

Advantages of Perpendicular Rail Traverser

---- Low noise It causes low noise level.
---- Maximum safety Offers guarantee of maximum safety for operators and for the material handled. We really care about the safety of everyone involved in the job.
---- Easy for operation These transfer carts are easy to drive, so as soon as you get it you will be able to use it to transport your loads. We will support you to make the best out of your heavy load transporter.
---- Suitable for All Kinds of Weight The battery powered trolley is superb for handling both small and extremely huge loads for its modular fabrication and its high payloads: up to 300 ton for each trolley.

Product Parameters

Step 1
CNC Cutting: Transport the steel plate from raw material warehouse to CNC cutting workshop for cutting. After the cutting, the workers will do some simple processing such as chip moving and setting out.
Step 2

Preliminary Assembling: Put the cut steel plate together according to the design drawing
Step 3

Welding: Weld the steel plate with automatic welding machine after the preliminary assembling
Step 4
Post weld treatment: Test the welding section after the welding, polish and burring. Post weld treatment to eliminate welding stress
Step 5

Spray Primer: Transport the structure part after processing to painting booth for spraying primer. The main component of the primer is zinc rich epoxy antirust paint. The primer is to two layers
Step 6

Assembling: Assemble the structure parts after spraying primer with wheels, motors and gear box, etc.
Step 7

Paint finish: Transport the assembled cart to painting booth, inspect the integrity of primer. After that paint the finish

Finished
Debugging: Debugging the cart after painting the finish with electric control system, after the debugging, the cart will test without load. And after the no load test, the cart will be tested with load. After the inspection, the cart will be transported to storage area.