High Precision Tension Amplifier Lightweight For Film Machine 115*x100*23mm For Face Mask Machine

High Precision Tension Amplifier Lightweight For Film Machine 115*x100*23mm For Face Mask Machine

Measurement Tension Amplifier Work With Tension LoadCell for Packing Machine

Measuring amplifiers ensure a stable bridge supply voltage, They amplify the output signal of the load sensors to a standard signal .

1. Preface

Tension transducer STA - 05 is the tension of Intelli gent tension transducer instrument . By using of key operation will complete zero alignment,calibration,convert the left or right tension sensor signal into astan dard industrial control signals, 0 ~ 10V / 0 ~ 5V and 0 ~ 20 mA output signal can be provided to PLC for automatic control .

2. Features

1. 32 bit CPU guarantees high speed, precision, ant-ijamming capability and ensures reliability.

2. The outside has no adjustable potentiometer.

3. The tension sensor can select Differential sensor or Strain- gauge sensor.

4. 0~ 10V/ 0~ 5V and 0~ 20mA output signals can be p-rovided to PLC and display instrument.

5. Use dispensing technology, small volume, light wei-ght.

6. Using DIN rail mounting, simple and convenient.

8. Operation and using

(1) Panel and indicators introduction

Panel operation as follows, it has two buttons and th-ree LED. One botoon used to zero alignment, another used to calibrate, three LED used to indicate the wor-king state of tension transducer.

LED2 turns red, LED1,LED3 red twinkle, there are several ways as follows:

Tension sensor connection drops or poor contact. LED1 twinkle shows left tension sensor has problem, LED3 twinkle shows right tensioin sensor has problem, ple-ase check sensor connection.

The difference of signal between left sensor and right sensor is too large. When the LED twinkle , it shows the sensorsignal is too small,please ajust the sensoror change it.

LED2 turns green,LED1,LED3 alternately twinkle,it shows zero alignment and calibration has problem,t-his reason refer to part 9.

Zero calibration operation:

Machine power off, there is no film or film is loose.

Press “Zero alignment” button for 3~5 sec,LED1 tu-rns on.

When LED1 starts twinkle,loosen “Zero alignment” button,the twinkle stops,LED1 turns off, so complete zero alignment.

a. Machine power off. Thread a string through the ree-ler center like what the material does during the act-ual operation.

b. Hang weights on the end of the string while the oth-er end is fixed well. The weights should be moreth-an half of the rated measurement range of the dete-ctor.

c .Make sure that weights fall naturally, the bearing h-ouses of detector reel are spherical universal ones and well lubricated.

d. When full- scale calibration,MC2 with MCC disconn-ect,the weights should correspond to full scale.

When half- scale calibration,MC2 with MCC connect, the weights should correspond to half scale.

e.Press “Calibration” button for 3~ 5 sec, LED3 turns on.

f. When LED3 starts twinkle, loosen “Calibration” but-ton, the twinkle stops, LED3 turns off, so complete calibration.

Packing and delivery:

1. Neutral carton packing
2. One piece in one carton box
3. Normally one controller with two loadcells,this is easy for shipping.
4. One unit shipping
5. Lead time:within 3 days

STA-05 Tension signal amplifier.pdf

Wuhan Micro Control Electric Co,LTD ( Wuhan True Engin Technology Development Co., Ltd ) is located in the coast of South Lake and surrounded by numerous colleges and universities.The Company focuses on the developing and production of industrial test and control system .True Engin is the first company which is committed to the tension control system developing in China. After more than ten years of prosperity , it has forged an excellent team in developing and application .Our Instructors lead tens of engineering masters and CNC technology professionals that treating technology innovation,high-quality protection to the products and seamless customer service as the thrust of the development of enterprises.We committed to upgrading the technology of Chinese Printing and Packaging Machinery Control System，Complex Control System and Cutting Machine Control System.Our target is comprehensive upgrading of the competitiveness of domestic industry of Machine Controlling

In the direction of Networked Measurement and Control System，we have a large number of advanced test and analysis equipment,software and Network Control Development Platform.We have the equipments such as U.S. HP, TEKTRONIX, NI, FLUKE and so on.We also have a close co-operation with the Measurement control Institute ，the Friction Institute, the Materials Institute of the Wuhan Technology University，and have a wide range of products co-operation with the Ordnance factory 711, 3303. Core parts through 711 SMT production lines, product after 711 of ISO9000 quality management system review and GJB related mechanical and electrical performance test.

Through years of research and development our company has formed a series of products about PLC、tension control system、tension sensing system、tension controller、tension detector、Mitsubishi magnetic powder brake、Mitsubishi tension detector、Mitsubishi tension controller、magnetic powder clutch and so on.The series of tension products are widely equipped with machinery equipments on a variety of printed-packaging, textile, wire and cable industry in the domestic, we have successfully provided the best match of tension control system and OEM for several magnetic clutch industry or magnetic powder brake industry.