FTTH Optical Splitter 1x16 1x8 1x4 Distribution Splice Closure 96
Cores 32 SC Coupler Outdoor Pole
GJS-D033 Fiber Optic Splice Closure (FOSC) is a member in dome
series of optical fiber cable splice closure. The cables and the
closure are sealed in a mechanical way with the help of compacting
pressure from the plastic screws (nuts) and the circular plastic
hoop. This model is suitable for different methods of branch
connection, including branching and splicing of uncut cables,
splitting and distribution.
1x16 Optical Splitter Closure Feature
- Ring using a special material that can be repeatedly opened, re-use
- Splice tray easy to use page design, fix on bottom holders one by
one, and velcro tape to tighten them
- Quick way to make use of open sealed maintenance easier
- Valve and grounding devices can be installed
- Advanced internal structure design
- Easy to re-enter, it never requires re-entry tool it
- Pass through cable entry
- Fiber holding tray can be replaced into adapter plates, max.
install 32pcs SC couplers
- PLC splitter mini module 1x2 1x4 1x8 1x16 1x32 can be installed in
the closure for fttx application
- Most can accommodate 6 fiber trays. Ribbon cable is available,
which can be installed with 6C or 12C ribbon cable, corresponding
max capacity is 432 core, 576 core.
- Mechanical seal: Excellent sealing performance,reusable. Protection
grade is IP 68.
1x8 Fiber Optic Joint Box Specification
| Model | GJS-D033 |
| Dimension | 450*φ230mm |
| Max capacity | 144cores single fiber |
| Splice tray capacity | 24cores |
| Number of splice tray | 6pcs |
| Adapter qty | 32pc SC coupler |
| Mini Splitter | 1x2 1x4 1x8 1x16 1x32 steel tube |
| Sealing type | Mechanical |
| Suitable cable diameter | Pinholeφ5-7mm, express cable φ10-17mm |
| Cable entry & exit | 1oval+4round (1express cable&4drop) |
| Material | Body:PP+GF, tray:ABS |
| Net weight | 4.2-4.8kg |
GJS-D033 dome closure with 1 uncut ports and 4 round ports,
mechancial sealing with air valve, grouding device and wires.
The express port is typically used for feeder cable go through the
box without cutting.
----------------------------------------------------------------------------------------------------------------------------------------------
1x8 splitter closure is totally enclosed with hook and waterproof
rings in the dome, and stainless steel cable fixture and clamps for
cable entry, all trays is standard 24cores fusion splice, and the
top can OEM with customer logo or labels as above.
----------------------------------------------------------------------------------------------------------------------------------------------
Dome mechanical splice enclosure max. can hold 6pcs trays, 1pc
adapter plate at back, all fix on bottomo holders. The adapter
plate can fix 32pcs SC adapters for splitter distribution and
splitting.
----------------------------------------------------------------------------------------------------------------------------------------------
All kinds of plc splitter mini module can be used, like 1x2 1x4 1x8
1x16 1x32, 2x2 2x4 2x8 2x16 2x32, etc. The splitter tube can fix in
fusion trays, the adapter in brackets, which is widely used in FTTH
network.
----------------------------------------------------------------------------------------------------------------------------------------------
Dome, cover, clamp,tray, buffer tube, nylon tie, cable tie, cable
sealing gromments, aerial mount kits, number mark, sand paper,
wrench, silver paper, Hexagon wrench, split card, grounding wire,
heat shrink sleeve, etc.
Application
- Aerial,underground,pipeline,handhole.
- The ambient temperature ranges from -40 to 65℃.
