CE High Efficiency Split Solar Water Heater with Stainless Steel
Reflector Solar Collector
Specifications
separate pressurized solar water heater,heat pipe system,collector
with solar keymark certificated,tank can put in any room.
Separate pressurized solar water heater
Use copper tube as its flow material, conducted by thermal
conductivity medium and vacuum tube does not take water, operating
under the pressure.
Use high-strength galvanized steel for outside shell with
mold-sprayed treatment.
There equipped with standard electric heating devices and automatic
temperature control device for the insulation tube.
As well as magnesium anode rode, which effectively prevent
encrustation and keep good insulation effective.
Key Features
1. Collector separates with the storage water tank, which can be
installed anywhere of the house.
2. The collector can be put on the inclined roof / flat roof/flat
place.
3. Anti-freeze, no water inside the tubes when it works.
4. Intelligent controller. The system is equipped with the
automatic procedure and electric heating system to supplement heat.
5. Workable at anytime.
6. Wide application, the whole heat collecting project can meet not
only hot water requirement but also can be used for many other
industry, warming, swimming heater fields.
Detailed Product Description
1) The pipeline is made of red copper and conducted by heat
transfer medium liquid.
Water can't flow in the vacuum tubes and is operated when confined.
the crust uses aluminum alloy mold material of high strength with
airflow design.
2) Temperature preservation is equipped with standard electric
water heater setting, automatic temperature control exchanger, and
increased anode magnesium bars sticking to prevent fervent furring.
3) The insulating layer uses polyurethane bulk bubble and has a
good effect of temperature preservation
4) The product successfully carries out the instthe instthe instahe
installation of separation according to fabricating yard and is
harmoniously blended with architecture
5) The equipment of separated solar water heater is composed by
heat collector, storage tank, electric control device, hot water
mix unit and fittings for circulation and installation
Parameter Table
| Model | Collector Model | Capacity | 20'GP | 40'GP | 40'HQ |
| PT-15 | PT15-58/1800 | 150L | 33 | 67 | 80 |
| PT-20 | PT20-58/1800 | 200L | 28 | 58 | 68 |
| PT-24 | PT12-58/1800 | 240L | 26 | 53 | 62 |
| PT-30 | PT15-58/1800 | 300L | 20 | 40 | 48 |
| PT-36 | PT12-58/1800 | 300L | 18 | 37 | 43 |
| PT-60 | PT20-58/1800 | 500L | 13 | 26 | 32 |
The detailed description
| Inner tank material | SUS304-2B stainless steel with 1.0-2.0mm thickness |
| Outer tank material | color steel with 0.5mm thickness or stainless steel with 0.5mm |
| Vacuun tube material | borosilicate glass 3.3; three target (CU-SS-AL)absorb coating |
| Hail resistance | 25mm |
| Insulation material | 50-60mm foaming polyurethane |
| Capacity | 100L--500L |
| Installation angle | 20,38,40,45 |
| Frame material | aluminium alloy |
| Reflector material | aluminium or stainless steel |
| Optional electrical heater | 1.5~3.0KW |
Technical Data of Heat pipe collector
| Production Model | PTSC-58-30 | PTSC-58-20 |
| Numbers of tube(pcs) | 30 | 20 |
| Absorber area approx.(m2) | 2.439 | 1.626 |
| Gross size(m) | 1.99*2.1*0.153 | 1.99*1.4*0.153 |
| Weight Empty(kg) | 93.5 | 63 |
| Hydraulic Connections | G3/4" male thread |
| Packages each unit (cartons) | tubes:3ctns manifold:1ctn | tubes:2ctns manifold:1ctn |
| Loading qty in 20 GP/40GP/40HQ | 63/130/145 | 90/185/210 |
| Fluid volume(L) | 1.7 | 1.2 |
| Min. volume flow rate per collector(L/H) | 108 | 72 |
| Rated volume flow rate per collector.(L/H) | 180 | 120 |
| Max. volume flow rate per collector(L/H) | 1200 | 1200 |
| Maximum operation pressure(Bar) | 6 |
| Test pressure(Bar) | 9 |
| Heat transfer fluid | Anti-freeze Fluid (Water-Glycol) |
| Max. working temp.( ºC) | 250 |
| hot water(L/Day) | 240 | 160 |
| ΔT | 35 ºC(Radiation>=800w/m2.day) |
| Collector efficiency | 76.4% |
| Medium | Pure water, or anti-freeze liquid |
| Start-up Temperature of heat pipe | <= 30°C |
| Material Details |
| Flow type | Heat pipe |
| Heat pipe material | copper |
| Heat pipe size | Top: Ø14*1mm;Body: Ø8*0.75mm |
| Tube diameter | φ58/ 1800mm |
| Solar vacuum glass tube | High boron-silicon |
| Coating of absorber on glass tube | Al-N-Al, Copper, Stainless steel |
| fins around heat pipe | single long Aluminum(1.68m) |
| Manifold pipe material | copper (Ø35x1.0mm) |
| Manifold casing material | Aluminum alloy frame(2.5mm) |
| Insulation material in manifold case | Glass fiber |
| Thickness of insulation(mm) | 45 |
| Density of insulation (kg/m3) | 90 |
| Frame material | Aluminum alloy frame(2.0mm) |
| Frame and manifold case finish | Black Powder coated |
| Sealing Materials | EPDM |
Package
1) Selling package: all export carton.
2) Transport package: Samples use the wooden box, other use the
export cartons.
3) Shipping: Small LCL and high value suggest the air transport .
FCL use the sea voyage.
Service
1) We offer customers 5 years for whole solar systems.
2) Carton design for customs is free offered when goods sent by
container.
3) When you have any questions regarding our products, feel free to
contact us. We will be very glad to service for you.
It's hoped that our solar system can save you more money as well as
protect our environment.
