Double Disc Separated Control Metallographic Grinding and Polishing
Machine Stepless Speed
Brief Introduction:
iGrind-816 has cooling device, which can cool the specimen during
grinding and polishing to prevent the destruction of specimen micro
structure. It is easy to use,safe and reliable, an idea equipment
for enterprises scientific research institutions and colleges
laboratory.
Technical Specifications:
| Disc Diameter | 203mm(Opt.250mm) |
| Rotation speed | 50-600rpm |
| Rotate Direction | Clockwise/Anticlockwise |
| Input voltage | AC220V/50HZ/1Ph |
| Disc Quantity | 2 |
| Power Consumption | 550W |
| Dimension | 690*735*310mm |
| Net weight | 55kg |
Grinding and polishing machine iqualitrol iGrind-816 is a
double-disc dual-control desktop machine, suitable for coarse
grinding, fine grinding and polishing of the sample, and can meet
two person working together.
The machine adopts micro-processing system, double-disc can be
directly achieve separately 50-1000 rpm speed and 150 and 300 rev /
min two-speed, so that the machine has a wider range of
applicability.
With cooling device, it could cool the specimen while pre-grinding
so as to avoid over heat to damage the metallographic organization.
Convenient use, safe and reliable, it is the idea equipment of
making specimen for the factories, research units , universities
and collages.
Features:
The two ends are independently controlled, and one machine is used
to complete the rough grinding, fine grinding, rough casting and
fine polishing of the metallographic samples.
Two speeds are fixed and the speed is convenient. It can switch the
steering wheel steering, which is convenient for operators to use.
The slewing water pipe can be rotated to adjust the water flow.
The equipment operates with low noise and smooth grinding discs.
With a cabinet-type workbench, there is no need to match the
workbench to facilitate the placement of tools, consumables and
other debris.
