Hat Roll Forming Machine Solar Racks Steel Sheets 1.1mm - 2.5mm

Hat Roll Forming Machine Solar Racks Steel Sheets 1.1mm - 2.5mm

C steel forming machine rolling C type purling finished product has good flexural compressive properties, and the straightness is good, completely automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation. Products can be used for the main body of large and medium-sized industrial and civil construction stress structure, such as factories, warehouses, engine garages, hangar, exhibition halls, theaters, sports venues, the shed roof bearing load and metope bearing of market garden.
This machine is mainly composed of passive feeding outfit, feeding outfit chassis, feeding import platform, leveling device, molding main engine, punching device, molding cutting device, hydraulic station and computer control cabinet.

Working flow

Decoiler → Feeding Guide → Roll Forming → Cut-to-length → Run out table

Components for hot selling roll forming machine:

Details of each composition

A De-coiler

1. Single unrolling machine, one side can put material.

2. Adopt automatic hydraulic system.

3. Coil weight (Max):10000kg.

4. Inter diameter: 470mm-520mm.

5. Maximal out diameter:1800mm.

6. Oil cylinder dia:120mm working pressure: 20mpa (=20Tons).

7. Coil width (Max.):1000mm.

8. Working speed: 0-25m/min.

9. Power: 5.5KW.

10. Hydraulic power: 3kw.

11. De-coiler should be with Loop control and hold down.

12. Coil car: 10Tons.

13. The motor power of coil car: 3Kw.

14. Pressure: 12Mpa.

B Roll forming main machine

1. Coil width: 1000mm effective width:930+3-3 mm (design base on 3mm).

2. Working speed: 0-20m/min (not contain cutting and punching).

3. Roll station: 17stations material of roller: Gcr15 bearing material; polished and coated with chrome HRC58-62°.

4. Material of main shaft: 45 forge steel(Same as SAE1045) diameter roller: 150mm.

5. Main power: 45kw, forming thickness: 2.5mm—3.5mm, Transmission: by chain.

6. Roll former has leveling bolts in the base.

C Cutting

1. Machine adopt hydraulic cutting.

2. Cutting after forming: Cut the sheet after roll forming to required length.

3. Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

4. Material of blade: CR12with heat treatment .

5. Length measuring: Automatic length measuring .

6. Tolerance of length: 4700mm+/- 2mm.

D Control panel

1Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase

2.Automatic length measurement.

3.Automatic quantity measurement.

4.Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved .

5.Length inaccuracy can be amended easily.

6.Control panel: Button-type switch and touch screen.

7.Unit of length: millimeter (switched on the control panel).

8. Laguage: English, Spanish and Chinese.

Machine Pictures:

As the co-founder of FAMOUS Engineering Company, Mr.Tomy GAO has been in the construction field for many years, and established series of companies with the target to create ecological chain in the building construction industry.

Nowadays, under FASECBuildings Group, there are several typical companies namely:

1. Hangzhou FAMOUS Steel Engineering Company

2. FASEC (Hangzhou) Window Wall Company

3. Hangzhou FASEC Building Material Company

Hangzhou USEU Metal Manufacturing Company and some more not listed here.

The key business scope of FASECbuildings Group include but not limited at:

1. Structural Steelworks & Steel Framing (Heavy/Light) construction

2. Glass Windows Doors, Curtain Wall Facade, Aluminum Panels Cladding, Partition Walls, Railing & Louvers, Screens Grills, BIPV etc

3. Building Roof Wall Flooring integrated material and other interiors new material R & D.

FASECbuildings Group always aim to offer cost saving prefab materials for USA-Europe & UK-Australia etc foreign standard market customers, with freely technical supports like engineering design when needed/detailing drawings/site construction guidance etc. We have multiple certification/experiences as well as the overall 2D/3D modelling capability for the building framing and the surroundings.

Brief Introduction of Subsidiaries:

1. Hangzhou FAMOUS Steel Engineering Co.,ltd. focus on the Design & Construction of various Steel Buildings and Structural Steelworks fabrication. The company have received a lot of foreign projects ranging from warehouse buildings, multi-storey apartments, high rise office & hotel buildings, space framing theaters, triangle truss buildings, to steel bridges, handling machinery framing, power plant towers, mining production line steelworks, cement production line steelworks, petro-chemical rackings etc. Basically the company have the full capability to operate various large-scaled projects complex except the simple building project.

2. FASEC (Hangzhou) Window Wall Company specializes in the offer of various aluminum & glass-related products design/manufacture/supply & installation. We have successfully supplied quite a lot of insulated & laminated glass panes, windows, glass doors, curtain walls, partition walls, railings, louvers, grills, metal claddings etc not only in China but also around the world. Australian standard, British Standard, Europe standard, and American standard etc aluminum & glass facade products are in our main research & development range.

3. Hangzhou FASEC Building Material Company play the role of the bridging and lubricating with different customers of new building material requirement for roof wall floor and interiors. Our building material team always are on the way to research and develop new style building material to save cost and time of building industrial customers. USEU Metal factory is its strong manufacturing backup force, and our own engineering team can offer various technical supports too.

FASECBuildings Group have passed by series of certifications like the quality management system (ISO 9001:2008), the Europe product quality control system EN1090, the structural fabrication system certificates of Europe ISO3834 and America AWS D1.1, the Australia AS2047 Glazed Windows Doors Qualifications etc.

Currently, FASECbuildings Group have spread its network across Xi’an, Shanghai, Nanjing, Guangzhou, Wuhan, Xiangfan, Liuzhou, Wuhu, Suzhou, Zhengzhou, and Yunnan, etc., as well as exporting business with America, Canada, Australia, New Zealand, United Kingdom, Germany, France, Bolivia, Chile, Argentina, Uruguary, Peru, Thailand, Philippine, Nigeria, Vietnam, South Africa, Ghana, Kenya, Zambia, UAE, Sudan, Iran, Irap, Angola, Poland, Mongolia, Russia and so on.

Through so many domestic & overseas project cases, FASECbuildings Group has successfully won reputations and experiences not only in China, but also in various foreign standards markets with examples of Europe Standards, America Standards, Australia Standards, British Standards, etc building related materials and building construction.

We keep improvement and innovation, with the slogan of “USA-EUROPE Standard Engineering and Quality Control Build Our Brand Reliability! One Trial Order Bring Constant Cooperation!”

Warmly welcome Customers to visit and communicate with us for free budget and detailed products catalog obtaining. Thank you all.