Silicone Rubber 2 x 1m Swimming Pool Control System Solar Heater
Control Sun Maxi Panels
A good pool heater has:
Swimming pool solar panels/collectors - the part that heats the
water and is circulated
Filter- removes debris before water is pumped through the panels
Pump - circulate s water through the filter, the panel, and then
back to the pool
Solar Controller - automatic monitors the pool water temperature
and the solar system.
Your pool water is pumped by the filter and goes through the solar
panels where its heated before returning back to your pool
Necessary Installation Site Conditions
The number of pool solar panels required to properly heat your
swimming pool solar heater will mostly depend on a few factors: The
surface area of your swimming pool water temperature which you want
to maintain shade area of the pool. Direction of the swimming pool
solar heaters.
A good rule of thumb: whatever is the surface area of your pool, you'll need about 50%
of that for swimming pool solar panels.
Example: Say you have a pool that measures 20' x 35', multiply 20 x 35 and
you'll have 700. Your surface area is 700 sq.ft. You multiply 700 x
0.5(50%) and you get 350 sq.ft. of panels.
One solar heating project should need:
1. panels- to see your pool size
2. solar controller-1pc
3. stand for panels(if your roof has angle that would not need),
one stand can for 2pcs panels
4. hook-up kit(1-2 sets)
Features:
* Modular panel system
* 15 year Pro Rata Warranty Panel
* 100% bird proof
* Each panel is equal to approx. 6m2 of pool surface area
* Can be installed on all roof surface
* Wind and chill resistant
* Complete with roof fittings
| Size | 1.6m x 0.7m | 2m x 1m |
| Gross Area | 1.12m2 | 2m2 |
| Frame | Aluminium |
| Inside material | Hi Silicone |
| Cover sheet | 3.0 mm solar |
| Collector diameter | 32mm |
| Flow rates Rec | 26 l/min |
| Testing pressure | 4.5 bar at NT |
| Working pressure | Up to 1.2 bar - 40 C |
| Temperature resistant | From -20 C to 115 C |
| Weight | 22kgs | 34kgs |
