Rubber accelerators M
Rubber auxiliary MBT
Specificatin | Chemical Analysis: |
Product Name | Rubber Accelerator MBT (M) | Chemical Name: | 2-mercaptobenzothiazole |
|
| CAS No.: | 149-30-4 |
Molecular Formula: | C7H5NS2 | Molecular Weight: | 167.26 |
Product Information:
Specification
Appearance (visual inspection): | Light yellow powder | Assay content% ~ | 95 |
Initial M.P.¥: | 170.0 | Loss on drying %: | 0.50 |
Ash content %: | 0.50 | Residues(150um)%: | 0.10 |
Compacted bulk density (kg/m3) | 560-600 | Bulk density (kg/cm3): | 400-440 |
Density at 25¥ (g/cm3) | 1.42-1.52 |
|
|
Typical Properties
It is yellow powder with little osmyl and taste bitter. The density
is 1.42-1.52.it is soluble in ethyl acetate, ethanol, solution of
NaOH and Na2CO3, insoluble in benzene, water and gasoline.Lower
explosion limit is 21g/m3.
Recommended Applications
In NR compounds, MBT based vulcanization systems exhibit less
reversion upon overcure than other systems. Vulcanizate
obtainedwith MBT tend to have a relatively low modulus but very
good aging properties.
To achieve a faster cure and a higher modulus. MBT can be boosted
by the use of secondary accelerators, such as
ZBEC, ZDEC, TMTD or DPG.
For the vulcanization of EPDM or IIR rubbers, MBT is a well
established component of many existing vulcanization systems. MBT
also finds application in latex form cure systems. It is
non-staining and non-discoloring.
Handling and Storage recommendations
Store MBT in a cool, dry, well-ventilated area, avoiding exposure
of the packaged product to direct sunlight. Usually the shelf time
is 24 months while the recommend use of time is within 12 months.
Website:www.chengbang-china.com
E-mail:sales at chengbang-china.com
MSN:salesjean at hotmail.com
Skype:jeanlinzz
