MGO Wall Panel Making Machine , Industrial Full Automatic Sandwich
Panel Machinery
XD-E Full Automatic MGO Wall Panel Maming machine With 2000 SQM
Product Description
The specification of the wall panel:
2440/2800/3000mm*600mm*75/90/120/150/180mm
Used as internal wall, external wall, roof board, enclosure wall,
And we could produce at your request
The features of the wall panel:
1. Heat insulation
2. Sound insulation
3. Water insulation
4. Moisture insulation
5. A grade fire protection
6. The panels could be reused
7. High strength, lightweight, shock resistance;
8. The coal ash and industrial solid wastes as raw material, energy
saving, environmentally friendly;
9. Installation is fast and simple, shortening the construction
period, saving labor lost and comprhensive cost
10. Increasing the floor area of the building;
II Project Feature
1. The source of the production raw materials is widely with no
regional restriction
The product is made of sawdust, straw (rice hulls), many kinds of
crop straw and
inorganic material (such as talcum powder, infusorial earth and
powder coal ash)
after special technology. So this project have low production cost,
small investment
and fast effectiveness.
2. The equipment has high automatic degree, simple production
technology, low
labor intensity and production line, and there is no noise and
three-wastes (waste water, waste gas and waste residue) during
production.
3. Low production energy consumption. With the influence of
chemical reaction,
it can meet the requirements about production technology without
high
temperature and high pressure.
Product Feature and Performance
Performance
1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
3 | Anti-breaking load | ≥1400N | 5640N |
4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
6 | Thermal bridges area ratio | ≤8% | 2.22% |
7 | Sound insulation Index |
| 36dB |
8 | Radioactivity |
| None |
III Feature
1. Anti-earthquake with light weight: In view of its weight per
unit area is only 1/10 of red brick wall, the product has good
anti-earthquake performance. It can be used at low-rise building
and high-rise building, and it is preferred to be used at workshop
with steel frame structure. It can replace the color steel plate
with its better performance.
2. Fast and convenient operation: It can be installed by board or
combination with the dry method, and the product can be nailed,
cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and
industrial wastes, so the production cost is low. With the low load
of girder and short construction period, it can reduce over 20% of
engineering cost after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production
processing need no high temperature and high pressure. Being a
green environmental-protection energy-saving building materials,
the product has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area: Under the same condition of
heat-preserving and sound insulation, with the thinner plate, the
product can increase over 10% usage area after compared with the
same building.
6. Having the following features: fireproofing, water-proof,
anti-impact, acid & alkali resistant and anti-aging.
