CE certificated,RoHS compliant.
Frequency Adjustment:Output frequency of the controller can be manually adjusted to
resonant frequency of the vibratory feeder to get smooth, quiet and
energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed
speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the
preset value when power on to avoid sudden shake. Soft start time
can be digitally preset.
Photoelectric Sensor ON/OFF Control:The CUH Intelligent Photoelectric Sensor can be connected to turn
on/off the controller.
Remote Speed Control:Output Voltage of the controller can be adjusted remotely by an
external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power
associated with ON/OFF Control of the controller to drive a
solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing
the ON/OFF button and hold for 2 seconds.
Digital Overheat Protection: If internal temperature of the controller gets too high, the
controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will
stop its output to protect itself and the load.
Restorable Short Circuit Protection:If output of the controller is short-circuited,the controller will
shut down its output to protect itself and the load. But the fuse
inside will not be blown.
Switch Sensor ON/OFF Control:Support NPN/PNP sensors or PLC remote full/empty shutdown control.
So when there is no short circuit at the output side,the controller
will work again after power on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load
from damage caused by too high voltage.
