Plug/Receptacle Type | Basic Designation | Structural Features | Remarks | Page No. |
Crimp Type | Basic Type | Plug J30J-TJ Receptacle J30J-ZK | Metal shell,wire crimp termination,straight cable outlet | Locking component types may be selected according to specific
requirements | |
Modified Type | Plug J30J-TJ-A Receptacle J30J-ZK-A | Compared with J30J-ZK/TJ products,a straight cable clamp is added
at the rear of the product, and the cable is covered with a metal
protective sleeve | |
| Plug J30J-TJ-C Receptacle J30J-ZK-C | Compared with J30J-ZK/TJ products,the wire exits at a 90°angle | |
| Plug J30J-TJ-C1 Receptacle J30J-ZK-C1 | On the basis of the original J30J series crimp-wire products,an
angled cable clamp is added, the wire bundle is covered with a
metal protective sleeve,and there is one cable outlet on the same
side | |
| Plug J30J-TJ-C2 Receptacle J30J-ZK-C2 | Compared with J30J-ZK-C1/TJ-C1 products,the outlet direction is
opposite;all other features are the same | |
| Plug J30J-TJ-C3 Receptacle J30J-ZK-C3 | On the basis of the original J30J series crimp-wire products,an
angled cable clamp is added, the wire bundle is covered with a
metal protective sleeve,and there are two cable outlets on the same
side | |
| Plug J30J-TJ-C4 Receptacle J30J-ZK-C4 | On the basis of the original J30J series crimp-wire products,an
angled cable clamp rear cover is added,and there are cable outlets
on both sides | |
| Plug J30J-TJ-D Receptacle J30J-ZK-D | Compared with J30J-ZK/TJ products,an anti-rotation slot is added to
the square flange | |
| Plug J30J-TJ-AD Receptacle J30J-ZK-AD | Compared with J30J-ZK/TJ-A products,anti-slip grooves are added on
the side of the shell,and an anti-rotation slot is added to the
square flange | |
| Plug J30J-TJ-Q Receptacle J30J-ZK-Q | Compared with J30J-ZK/TJ products,the shell square flange and
mounting dimensions are enlarged to the corresponding dimensions | |
| Plug J30J-TJ-Q8 Receptacle J30J-ZK-Q8 | Compared with J30J-ZK/TJ products,the shell square flange and
mounting dimensions are enlarged to the corresponding dimensions | |
| Plug J30J-TJ-AQ8 Receptacle J30J-ZK-AQ8 | Compared with J30J-ZK-A/TJ-A products,the shell square flange and
mounting dimensions are enlarged to the corresponding dimensions | |
Solder Type | Plug J30J-TJS Receptacle J30J-ZKS | Compared with J30J-ZK/TJproducts,the contact termination form is
solder cup type | | |
Straight PCB Type | Plug J30J-TJN Receptacle J30J-ZKN | The contact termination form is changed to straight PCB type,with
PCB grid spacing 2.54*2.54,recommended PCB thickness (1.6-2.5 mm) | | |
Plug J30J-TJN-J Receptacle J30J-ZKN-J | The contact termination form is changed to straight PCB type,with
PCB grid spacing 1.27*2.54,recommended PCB thickness (1.6-2.5 mm) | |
Plug J30J-TJN(X) Receptacle J30J-ZKN(X) | Compared with J30J-ZKN/TJN,the pin length is increased,recommended
PCB thickness(1.6-3.5 mm) | |
