Mbf64-11 Type Medium-Temperature Box Furnace For Ltcc High Durability

The MBF64-11 type medium-temperature box furnace, featuring a combination design of ceramic tubes and silicon carbide rods, stands out in terms of corrosion resistance, temperature uniformity, and ease of operation, making it a reliable choice for medium-temperature heating processes in laboratories.

Primarily used for degassing, sintering, and curing processes of LTCC, glass, electronic components, electronic ceramics, and similar products.

• Rated Temperature: 1000°C
• Maximum Temperature: 1100°C
• Furnace Chamber Dimensions: 600×600×600mm (W×H×D)
• Effective Dimensions: 400×400×400mm (W×H×D)
• Heating Elements: FEC ceramic fiber heating plates
• Maximum Heating Power: 24kW
• No-Load Holding Power: ≤12kW
• Heating Rate: ≤6°C/min
• Heating Layout: Four-sided heating (top, bottom, left, right)
• Temperature Control Points: Three independent control points (front, middle, rear)
• Temperature Control Stability: ±1°C, with PID parameter self-tuning function
• Temperature Uniformity: ±3°C within the effective area (tested at 1000°C with a crucible under constant temperature)
• Thermocouple Type: K-type
• Temperature Control Instrument: Imported temperature control module with PID self-tuning function
• Program Steps: 20 steps (can be adjusted according to actual process requirements)
• Exhaust Chimney: Exhaust port at the rear, manually adjustable in size
• Sintering Atmosphere: Air
• Alarm Protection: Audible and visual alarms for over-temperature, thermocouple breakage, etc., with power-off protection for over-temperature
• Surface Temperature Rise: <35°C

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
• Process air conditions: clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3 - 6m3/h
• Ventilation system: non-contact access to the user pumping system, pumping capacity is greater than 10m3/h
• Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m2
• Power conditions: capacity greater than 32kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation)
• Installation site: 2200mm×2000mm×2500mm (W×H×D), installation area greater than 4.5m2

Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.

We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.

We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.

As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.