Automatic PSA Oxygen Generator with 950 Nm3/h Output and 12 Months Warranty for Medical Oxygen Generation

PSA Oxygen Gas Generator Manufacturers Medical Oxygen Generator Plant for Sale

Product Description

PSA is short for: Pressure Swing Adsorption

Pressure

Elevated pressures are needed for the process, usually 4-8 bar(g). In case a higher pressure is required for your process, this can be applied, too.

Swing

While one vessel is being pressurised, the other vessel is being depressurised.

Adsorption

Separation of atmospheric air is done with the PSA principle; oxygen is separated from the air through adsorption process.

Product Parameters

SPARE PARTS

1. Air Compressor (Screw type): Air is used as raw material to collect & compress air to 8 bar.

2. Refrigerated Dryer: The standard configuration removes moisture and impurities in the air, so that the air dew point reaches -20°C (the intermediate configuration uses an adsorption dryer, and the dew point reaches -40°C; the advanced configuration uses a combined dryer, and the dew point reaches- 60ºC).

3. Precision Filter: A/T/C three-stage filter to remove oil, dust and impurities.

4. Air buffer Tank: store pure and dry air for subsequent adsorption and separation of nitrogen as raw material storage.

5. Adsorption Tower: A&B adsorption tower can work alternately, regenerating adsorption, filling sodium molecular sieve to filter out oxygen molecules.

6. Nitrogen Analyzer: real-time monitoring and analysis of nitrogen purity, indicating that the equipment is working normally and alarming.

7. Valves & Pipelines: Intelligent control valves realize automatic operation of equipment, PLC control, SUS304 pipelines.

8. Nitrogen Buffer Tank: Store nitrogen with qualified purity, which can be directly piped or used for bottle filling.

9. Nitrogen Booster: Gas booster, pressurize the nitrogen to the filling pressure, generally 150 or 200bar.

10. Filling Manifold: split high-pressure nitrogen into each gas cylinder

In addition to PSA Oxygen Generators, we also produce VPSA Oxygen Generators, storage tanks, heat exchangers and other products. If you are interested in VPSA Oxygen Systems or other products, please feel free to send an email to info@gneeheatex.com. We will be very happy to serve you.

FAQ:

Q: What the nitrogen purity of this machine can be achieved?

We can provide 99%~99.9999% nitrogen purity.

Q: The more information you kindly tell us,the better professional service we provide for you !

a. What is the gas source you currently use?(cylinder/dewar/liquid gas/other)

b. Gas consumption?(Nm3/h,L/min)

c. Required gas pressure?

d. Required gas quality?(eg:Maximum oxygen percentage, Maximum moisture content, etc)

Q: Nitrogen equipment is safety?

Definitely!Nitrogen/Oxygen generator is a kind of air separation device under normal temperature, it can supplystable and

continuous nitrogen/oxygen gas, it doesn't need any high-pressure cylinders and liquid cylinders which havepotentially dangerous; so we don't need to worry about no-timely supply due to special circumstance.

Q: The producing nitrogen/oxygen is gaseous state or liquid state?

Our nitrogen/oxygen equipment use PSA air separation technology under normal temperature,with no-lowtemperature operation,the temperature of nitrogen/oxygen product is close to ambient temperature.

Q: How long is the nitrogen/oxygen equipment service life?

Generally speaking,industrial equipment service life is depend on daily maintenance. under normalmaintenance,our equipment can well running for more than 10 years.

Q: How is the maintenance time of oxygen equipment?

For Air purification module: the primary filters need to replace after 4000h normal operation; precision,extra-precision filters need to replace after 8000h,12000h normal operation: valve seal seal for 16000h;other filtersdepend on actual operation.

As a professional pressure vessel enterprise,Henan Gnee New Materials Co., Ltd. has been involved in the pressure vessel industry since 2012. Our company can provide products such as large cryogenic storage tanks and LPG series containers. At the beginning of the company's establishment, it purchased the most advanced equipment and recruited a group of skilled front-line workers. We are committed to providing the best products to our international customers. The company covers an area of 68,000 square meters and has 100 front-line workers, 12 technicians and 6 quality inspectors. The integration of production and sales, the company consists of five main departments: production department, technical department, sales department, general accounting department, and human resources department. Also, each department can be divided into many smaller departments. All departments cooperate with each other to bring the best for our company. In order to bring the most qualified products to the market, our quality control department implements strict quality inspection process from raw material procurement to finished product testing, to ensure that only the best products leave the factory for customers.

The group adheres to the tenet of “intentional management, customer priority, coordinated development and dedication to society” and abides by the business philosophy of “technology first, quality as priority, striving for excellence, integrity for future”, which continuously satisfy different needs of customer around the world in the steel supply chain area. Professional sales team, providing customers with first-class services; strict purchasing and quality inspection team, carefully selecting high-quality raw materials; advanced scientific and technical team to improve production and reduce costs for customers; excellent design and processing team, carefully crafted and refined; intimate shipping logistics team protecting product transportation.