FDA-approved PP Material Airless Pump Bottle Toothpaste Custom Logo
Color Available 100ml
♦Product Description:
Our 100ml Airless Pump Toothpaste Bottle, crafted from FDA-approved
PP material, guarantees top-tier safety—non-toxic, BPA-free, and
compliant with strict food-contact standards, so no harmful
substances leach into toothpaste even with long-term use. Its
advanced airless pump technology isolates toothpaste from air and
external contaminants, effectively preventing oxidation, bacterial
growth, and drying out, which preserves the product’s freshness,
active ingredients, and effectiveness while ensuring every last
drop is fully utilized (no more wasted residue). The practical
100ml capacity suits both daily home use and travel (compact enough
for toiletry bags without taking excess space), and we offer custom
logo printing and color options—perfect for matching your brand
identity, bathroom decor, or personal style, making it an ideal
choice for households, hotels, and personal care brands aiming to
elevate their product lineup.
♦Production Specification:
A. Primary Specification Properties
1. Material
| MATERIAL | MATERIAL DESIGNATION NAME | ALTERNATE MATERIALS |
| Base Material | Dispenser: 1. Spring: TPE 2. Piston: PE 3. Others: PP | N/A |
| Masterbatch | Standard white or customization | N/A |
2. Dimensional Requirements
| Item | Description | Specification |
| 1 | Overall Height | 100ml | 182.2±0.80mm |
|
|
|
|
| 2 | Weight of dispenser (without Piston) | 100ml | 39.3g±1.0g |
|
|
|
|
| 3 | Weight of piston | 2.8g±0.2g |
| 4 | Over cap diameter | 39.60±0.40mm |
| 5 | Inner diameter of body | 37.60±0.15mm |
| 6 | Upper diameter of piston | 37.95±0.15mm |
| 7 | Weight of labels | TBD |
| 8 | Weight of sleeves | TBD |
Weight is excluding the sealing foil on the body |
B. Additional requirements
1.2 Must be free of dirt, grease, oils, or other foreign materials.
1.3 Parts must be free of flash, short shots, sink or other
imperfections that may affect functionality of the part or has
potential to cause injury.
2. Function test
2.1 Vacuum leakage test
After filling with toothpaste, put the finish part with holding
pressure u-0.03MPa, 10 minutes". The result is ok if there is no leakage
2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The
result is ok if there is no crack on the body.
3. Decoration
- Shrinking sleeves inspection
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* M3.5
- Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: AEab* <3.5
C. Markings
- Mark each pallet clearly on the top and at least two sides with the
following minimum information:
- Supplier's name and address
- Quantity
c. Manufacturing date
d. Lot number
e. Order number
2.2 Or use the customization mark according to Customer
D. Storage Requirements
The products must be stored upon receipt from the supplier within
the original closed container, in a clean dry, well-aired store,
away from direct sunlight, humidity and sources of contamination or
foreign door and insect.
E. Certificate of Analysis
•Manufactured date, lot number, quantity , materials
•Includes measured visual inspection, key function test, and
critical dimension measurement result.
