The LNK-POE200W/LNK-POE300W series is a professional Wall Mount Active POE Injector
with an all-in-one integrated design—no separate power supply or
independent injector is required,
making it a streamlined solution for small-to-medium network
deployments. As a dedicated Wall
Mount Active POE Injector, it leverages active power management technology to deliver stable
power to PoE-powered devices (PDs), while its wall-mountable
structure optimizes space utilization,
addressing the challenge of limited room in crowded equipment
enclosures or small network cabinets.
This Wall Mount Active POE Injector fully complies with the IEEE 802.3af/at Ethernet power supply
standards, ensuring broad compatibility with common network devices
such as wireless access points
(APs), 4MP network cameras, IP phones, and small-scale IoT sensors.
It supports direct connection to
standard wall electrical outlets, eliminating the need for extra
power cables or power distribution units
(PDUs)—simplifying on-site wiring and reducing deployment
complexity. Its compact size (typically
150×80×40mm, depending on model) allows installation on walls,
cabinet side panels, or under desktops,
avoiding the need for rack space and making it ideal for
space-constrained environments like retail store
backrooms, office utility closets, or smart home control centers.
A core advantage of the Wall Mount Active POE Injector lies in its built-in multi-layer protection mechanisms:
it integrates over-voltage, over-current, and short-circuit
protection to safeguard both the injector itself and
connected PDs. When an overload (e.g., excessive current draw from
a faulty device) is detected, the injector
automatically shuts down power output; once the overload is cleared
(e.g., faulty device disconnected), it
restores power supply automatically—ensuring 24/7 reliable
operation without manual intervention.
By enabling power current to travel alongside network signals on a
single Cat5e/Cat6 Ethernet cable, this Wall
Mount Active POE Injector eliminates the need to directly connect a power supply to each
wireless LAN device
or terminal. The integration of power and data transmission not
only reduces the number of required cables
(cutting material costs by 30% or more) but also minimizes on-site
installation manpower—especially useful for
scenarios where wiring modifications are difficult. Whether used in
small enterprise wireless networks, residential
security systems, or retail IoT deployments, the Wall Mount Active POE Injector combines space-saving design,
active power stability, and cost efficiency to deliver a practical
PoE power supply solution.
