Product Description:
A 10-layer, 1 oz rigid PCB is a high-performance circuit board with
10 conductive copper layers and a standard copper thickness of 1
ounce on each layer. This type of board is used in advanced electronics where high
density, reliability, and signal integrity are essential.
The term "10-layer" refers to the number of conductive copper
layers. These layers are stacked and separated by insulating materials
(dielectrics) like FR-4 (fiberglass-epoxy laminate). The stack-up of these layers is carefully designed to optimize
performance. A typical configuration might include:
Signal Layers: These layers carry data and signals between components. With 10 layers, designers have ample space to route complex
circuits, reducing signal congestion and allowing for high-density
component placement.
Power and Ground Planes: Dedicated layers for power and ground provide a stable and
low-impedance path for current, which is crucial for high-speed
digital circuits. They also act as a shield to minimize electromagnetic interference
(EMI) and help with heat dissipation.
Technical Parameters:
| Product item | 10 layer rigid PCB board |
| Board Thickness | FR4 Tg150 1.6mm |
| Processing Technology | Impendace control, golden finger |
| Solder Mask Color | Geen soldermask+ white silkscreen |
| Standard Testing | IPC Class 2 |
| Minimum Hole Size | 0.2mm |
| Pcba Service | SMD SMT DIP Component Assembly |
| Minimum Line Space | 3mil (0.075mm) |
| Min Hole Size | 0.2MM |
Support and Services:
Our Product Technical Support and Services for the Heavy Copper PCB
include:
- Expert consultation on design and manufacturing considerations
- Assistance with material selection and specifications
- Guidance on meeting industry standards and regulations
- Troubleshooting and resolution of technical issues
- Customization options to meet specific requirements
