Split Frame Pipe Cutting Machine OD610 for Precision Cold Cutting
and Pipeline Maintenance
OD-610 Split Frame Pipe Cutting Machine
The OD-610 split frame pipe cutting machine handles pipe diameters
from 457 mm to 610 mm. It combines portable design with robust
clamping strength, ensuring precise onsite machining. Cold cutting
technology provides spark-free and heat-free operation, making it
safe for hazardous environments. The OD-610 is widely applied in
chemical plants, nuclear facilities, shipyards, and power
generation industries. Supporting V, J, and compound beveling, it
allows accurate weld-end preparation and efficient pipe
replacement. Its versatile tooling, long service life, and stable
performance make it a trusted choice for field technicians managing
large-scale pipeline construction and critical maintenance tasks.
SPECIFICATIONS
| Item | ODM610 (Electric) | ODP610 (Pneumatic) | ODH610 (Hydraulic) |
|---|
| Drive Type | Metabo Electric Motor | Pneumatic Motor | Hydraulic Motor |
| Power | 3.22 Hp / 2.4 Kw | 3.75 Hp / 2.76 Kw | 10 Hp / 7.5 Kw |
| Air Consumption | N/A | 2.8 m³/min @ 0.6 MPa | N/A |
| Voltage | 220-240 V, 50/60 Hz | N/A | 380 V, 50/60 Hz |
| Working Range (OD) | 457–610 mm (18"–24") | 457–610 mm (18"–24") | 457–610 mm (18"–24") |
| Wall Thickness | Standard tool silde: ≤30 mm | Standard tool silde: ≤30 mm | Standard tool silde: ≤30 mm |
| Wall Thickness | Heavy wall tool slide: 200 mm | Heavy wall tool slide: 200 mm | Heavy wall tool slide: 200 mm |
| Feed Rate | 0.083 mm/rev | 0.083 mm/rev | 0.083 mm/rev |
KEY FEATURES
Cold Cutting Technology
The OD610 utilizes precision cold cutting to eliminate heat-induced
material changes, delivering clean burr-free ends that require no
additional finishing while ensuring weld-ready surfaces for
high-pressure applications.
Split Frame Advantage
Its clamshell design enables rapid installation on active pipelines
without system shutdown. All components remain securely integrated
within the two-frame assembly, preventing loss and simplifying
transport.
Robust and Lightweight Options
Steel construction provides maximum stability for heavy-wall pipe
processing, while the aluminum option offers remarkable portability
for elevated platforms or confined space operations.
Versatile Drive and Accessory Support
Configured for beveling, facing, and counterboring operations, the
machine supports pneumatic, hydraulic, and electric drive systems
to adapt to diverse job site conditions.
POWER OPTIONS
Electric Motor, Pneumatic Motor and Hydraulic Motor
ODM (Electric):
Metabo Electric Motor
Model:W24-230MVT
Motor Power:2.4 Kw (3.22 Hp) / 10 A
Power Supply:220-240 V, 50/60 Hz
Made in Germany
Suitable for more than 80% of applications. Requires 220V-50Hz
power supply and is convenient for on-site use.
ODP (Pneumatic):
Pneumatic Motor
Motor Power:2.76 Kw (3.75 Hp)
Air Consumption:2.8 m³/min @ 0.6 Mpa
Suitable for sites with explosion-proof requirements. However,
performance may be affected if the air supply is far from the site
or if air pressure is low.
ODH (Hydraulic):
Hydraulic Motor
BMR-100 (ODH168-ODH457)
BMR-125 (ODH508-ODH830)
BMR-160 (ODH914-ODH1230)
Hydraulic Power Unit
Model: HPU-10E
Motor power: 7.5 Kw (10 Hp)
Power supply: 3 Ph, 380-440 V+N, 50/60 Hz
Max flow: 32 L/min
Pressure: 12.5 Mpa
Recommended for model OD830 and above to ensure greater power.
Please note, however, that hydraulic stations are costly and
inconvenient to transport.
TOOL SLIDE
3" Standard Tool Slide Kit
(Cutting Tool Slide and Beveling Tool Slide)
Standard Tool Slide for model OD168-OD762.
With standard 12×20mm beveling tool bits, achieve cut / bevel upto 30 mm wall
thickness in one pass.
Max. Travel: 75 mm.
3" Cutting Tool Slide, Part No. ODSCT-3001A
3" Beveling Tool Slide, Part No. ODSBT-3002A
4" Standard Tool Slide Kit
(Cutting Tool Slide and Beveling Tool Slide)
Standard Tool Slide for model OD830-OD1230.
With standard 12×20mm beveling tool bits, achieve cut / bevel upto 30 mm wall
thickness in one pass.
Max. Travel: 100 mm.
4" Cutting Tool Slide, Part No. ODSCT-3003A
4" Beveling Tool Slide, Part No. ODSBT-3004A
3" Heavy Wall Tool Slide
Heavy Wall Tool Slide for model OD168-OD762.
Install 25 mm width tool bits that can cut / bevel tubes of any
wall thickness.
Max. Travel: 75 mm.
3" Heavy Wall Cutting Tool Slide ( Heavy Wall Beveling Tool Slide),
Part No. ODHT-3005A
4" Heavy Wall Tool Slide
Heavy Wall Tool Slide for model OD830-OD1230.
Install 25 mm width tool bits that can cut / bevel tubes of any
wall thickness.
Max. Travel: 100 mm.
4" Heavy Wall Cutting Tool Slide ( Heavy Wall Beveling Tool Slide),
Part No. ODHT-3006A
Tracking Tool Slide
O.D. Tracking Slide- can be solution for all misshapen tubes and
pipes. Tracking Tool Slides feature durable spring and tracking
module that follows the contours of a deformed or less than
perfectly round pipe. Install 25×25 mm tool bits.
Max. Travel: 55 mm.
Tracking Tool Slide, Part No. ODST-3007A
Counterboring Tool Slide
Designed for the precision counterboring of tube and pipe inside
diameter. The Counterboring Tool Slide can be attached directly to
the standard tool slide on all OD machines. Install 08×30 mm tool bits.
Max. Travel: 70 mm.
Counterboring Tool Slide, Part No. ODCBT-3008A
Swivel Counterboring Tool Slide, Part No. ODCBT-3009A
SPLIT FRAME PIPE CUTTING MACHINE SELECTION TABLE
| Model | Working Range (mm) | Working Range (inch) | Tool Slide |
| OD-89 | 18-19 mm | 0.7"-3.5" | 1" |
| OD-168 | 50-168 mm | 2"-6" | 3" |
| OD-230 | 80-230 mm | 3"-8" | 3" |
| OD-275 | 114-275 mm | 5"-10" | 3" |
| OD-325 | 159-325 mm | 6"-12" | 3" |
| OD-377 | 200-377 mm | 8"-14" | 3" |
| OD-426 | 273-426 mm | 10"-16" | 3" |
| OD-457 | 300-457 mm | 12"-18" | 3" |
OD-508 | 355-508 mm | 14"-20" | 3" |
| OD-560 | 400-560 mm | 16"-22" | 3" |
| OD-610 | 457-610 mm | 18"-24" | 3" |
| OD-660 | 500-660 mm | 20"-26" | 3" |
| OD-715 | 560-715 mm | 22"-28" | 3" |
| OD-762 | 600-762 mm | 24"-30" | 3" |
| OD-830 | 660-830 mm | 26"-32" | 4" |
| OD-914 | 762-914 mm | 30"-36" | 4" |
| OD-1066 | 914-1066 mm | 36"-42" | 4" |
| OD-1230 | 1066-1230 mm | 42"-48" | 4" |
TYPES OF GROOVE WELDS
A portable beveling machine can be equipped with different tool
slides and tool bits to process V-grooves, J-grooves, and compound
grooves, as well as perform internal beveling and boring
operations.
ONSITE SPLIT FRAME PIPE CUTTING MACHINE APPLICATIONS
OD610 Split Frame Pipe Cutting Machine Applications
The OD610 handles pipes from 457mm to 610mm, serving critical roles
in natural gas distribution, offshore engineering, and thermal
power stations. Its cold-cutting capability avoids microstructural
changes, ensuring superior weld quality for high-stress
applications. In subsea and marine projects, the machine supports
pipeline laying and repair operations. It is also effective in
district heating networks and industrial plant expansions, where it
enables modifications without process interruption. The clamshell
design simplifies handling of large-diameter pipes, reducing labor
and equipment costs. For water supply and treatment infrastructure,
the OD610 ensures accurate, durable pipe connections. Its
versatility and precision make it indispensable for modern
engineering and maintenance.
AFTER-SALES SERVICE
Product Warranty
All products are backed by a 12-month warranty from the date of
shipment. During this period, any manufacturing defects will be
addressed promptly to ensure reliable performance and customer
satisfaction.
Spare Parts Supply
We maintain a comprehensive inventory of spare parts to minimize
downtime. All spare parts orders are processed and dispatched
within 2 business days, ensuring quick delivery and continuous
operation of your equipment.
Technical Support & Product Guidance
Each machine is supplied with a detailed instruction manual and
step-by-step operation videos. For additional support, our
technical team provides real-time video guidance and remote
troubleshooting, ensuring that your equipment is operated safely
and efficiently.
