OD660 Pipe Cutting and Beveling Machine 20 to 26 Inch Onsite Cold
Cutting Device
The OD660 Pipe Cutting and Beveling Machine provides reliable cold
cutting performance for pipes sized 20" to 26" (500–660 mm). Its
lightweight yet strong clamshell design enhances portability while
maintaining structural rigidity. The OD660 is favored for projects
that demand consistent weld-prep quality, including power plants,
chemical refineries, and offshore installations. It reduces
downtime by enabling quick setup and efficient machining in both
horizontal and vertical orientations. With wide compatibility
across pipe materials, this model ensures operators can achieve
precise bevels, chamfers, and counterbores even under challenging
site conditions.
SPECIFICATIONS
| Item | ODM660 (Electric) | ODP660 (Pneumatic) | ODH660 (Hydraulic) |
|---|
| Drive Type | Metabo Electric Motor | Pneumatic Motor | Hydraulic Motor |
| Power | 3.22 Hp / 2.4 Kw | 3.75 Hp / 2.76 Kw | 10 Hp / 7.5 Kw |
| Air Consumption | N/A | 2.8 m³/min @ 0.6 MPa | N/A |
| Voltage | 220-240 V, 50/60 Hz | N/A | 380 V, 50/60 Hz |
| Working Range (OD) | 500–660 mm (20"–26") | 500–660 mm (20"–26") | 500–660 mm (20"–26") |
| Wall Thickness | Standard tool silde: ≤30 mm | Standard tool silde: ≤30 mm | Standard tool silde: ≤30 mm |
| Wall Thickness | Heavy wall tool slide: 200 mm | Heavy wall tool slide: 200 mm | Heavy wall tool slide: 200 mm |
| Feed Rate | 0.083 mm/rev | 0.083 mm/rev | 0.083 mm/rev |
PRODUCT ADVANTAGES
Why Choose the OD660 Pipe Cutting and Beveling Machine?
Cold Cutting Advantage
Prevents material hardening, offering clean cuts and improved weld
quality.
Heavy-Duty Performance
Engineered to process larger pipes up to 660 mm OD in construction
and refinery sectors.
User-Friendly Setup
Split clamshell design ensures simple mounting without dismantling
adjacent structures.
Long Tool Life
Optimized cutting tools extend operating time and reduce
replacement frequency.
Reliable in Harsh Conditions
Performs efficiently in offshore, petrochemical, and pipeline
maintenance projects.
SELECTION GUIDE
Please follow the guidelines below or provide us with your specific
requirements so that we can offer you the most professional model
selection advice.
1. Choose the Clamshell Material
The OD series clamshell pipe cutting and beveling machines consist
of a main body ring and a rotating gear ring. The gear ring is made
of heat-treated alloy steel, while the main body ring can be
selected in either aluminum or steel.
AOD model (Aluminum): Recommended for on-site machining, especially where lifting
equipment is not available.
OD model (Steel): Offers higher strength and longer service life, suitable for
heavy-duty and long-term applications.
For model OD560 and below, the machine can be split into two halves
for manual handling, regardless of whether it is aluminum or steel.
For model OD610 and above, if manual handling is required, we
recommend the aluminum body.
2. Choose the Drive Type
ODM (Electric): Suitable for more than 80% of applications.
Requires 220V-50Hz power supply and is convenient for on-site use.
ODP (Pneumatic): Suitable for sites with explosion-proof
requirements. However, performance may be affected if the air
supply is far from the site or if air pressure is low.
ODH (Hydraulic): Recommended for model OD830 and above to ensure
greater power. Please note, however, that hydraulic stations are
costly and inconvenient to transport.
3. Confirm Pipe Wall Thickness
For wall thickness ≤30 mm, use the standard tool slide.
For wall thickness >30 mm, use the heavy wall tool slide, as
different toolbit sizes are required.
4. Confirm Bevel Angle and Bevel Type
The bevel angle and type are required to select suitable toolbits,
such as V-type, J-type, or compound bevels.
5. Confirm Pipe Material and Quantity
Pipe material and quantity are necessary to determine the proper
toolbits and the number of toolbits required.
PIPE CUTTING AND BEVELING MACHINE SELECTION TABLE
| Model | Working Range (mm) | Working Range (inch) | Tool Slide |
| OD-89 | 18-19 mm | 0.7"-3.5" | 1" |
| OD-168 | 50-168 mm | 2"-6" | 3" |
| OD-230 | 80-230 mm | 3"-8" | 3" |
| OD-275 | 114-275 mm | 5"-10" | 3" |
| OD-325 | 159-325 mm | 6"-12" | 3" |
| OD-377 | 200-377 mm | 8"-14" | 3" |
| OD-426 | 273-426 mm | 10"-16" | 3" |
| OD-457 | 300-457 mm | 12"-18" | 3" |
OD-508 | 355-508 mm | 14"-20" | 3" |
| OD-560 | 400-560 mm | 16"-22" | 3" |
| OD-610 | 457-610 mm | 18"-24" | 3" |
| OD-660 | 500-660 mm | 20"-26" | 3" |
| OD-715 | 560-715 mm | 22"-28" | 3" |
| OD-762 | 600-762 mm | 24"-30" | 3" |
| OD-830 | 660-830 mm | 26"-32" | 4" |
| OD-914 | 762-914 mm | 30"-36" | 4" |
| OD-1066 | 914-1066 mm | 36"-42" | 4" |
| OD-1230 | 1066-1230 mm | 42"-48" | 4" |
OD660 Pipe Cutting and Beveling Machine Application Industries
Deployed in oil transmission lines, the OD660 enables safe cutting
under hazardous conditions. Hydropower stations use it for turbine
pipe maintenance. In ship repair docks, it delivers smooth weld
prep in confined areas. Pharmaceutical plants require precise
bevels on stainless steel pipes. It also serves urban
infrastructure projects, providing reliable solutions where on-site
welding preparation is challenging.
Exhibition Photos
MT Portable Machine, as a professional manufacturer of on-site
machining equipment, participates in exhibitions worldwide.
