KNX software functions: Different dimming curves and dimming speeds, the same dimming
time, memory function, ON/OFF delay, staircase time function
with/without manual OFF
function, scenes (up to eight stored brightness values can be
retrieved), central function, logic
operation or priority control, blocking function, status feedback,
behaviour on bus voltage
recovery.
Switch contact: for switching the electronic ballasts/transformers
Nominal voltage: AC 230 V, 50-60 Hz
Nominal current: 16 A, cosϕ = 0.6
Switching capacity: AC 230 V, 3600 W, cosϕ = 1
Capacitive load: AC 230 V, 16 A, 200 µF
Incandescent lamps: AC 230 V, max. 3600 W
Halogen lamps: AC 230 V, max. 2500 W
Fluorescent lamps:
AC 230 V, max. 3600 VA, uncompensated
AC 230 V, max. 2500 VA, with parallel compensation
LV- halogen lamps with wound transformer: max. 2000 VA
0-10 V interface: 0.12-100 mA
Voltage range: DC 0-10 V
Device width: 4 HP = ca. 72 mm
Contents: With bus connecting terminal and cable cover.
