Mini Coil Heater With Axial Screw Adjustable Diameter For Nozzle
Heating
Description
Axial clamp mini coil heaters are a proven performer for high
cavitation applications including pre-forms, caps and closures, and
razors. GME axial clamp heaters positively lock on the nozzle
ensuring excellent heat transfer and durability. Adjustments can be
made with a single front facing allen screw, greatly simplifying
tightening and removal.
With flat mini coils in direct contact with the injection molding
nozzle GME axial clamp heaters can be wound with more heater coils
closer to the edge. This configuration improves responsiveness and
heat profile.
| Standard Axial Lock-up Heaters |
| Diameter | Width | Watts | Volts |
| “3/4” “(19.05mm)” | “1.2” “(30mm)” | 149W | 240V |
| “3/4” “(19.05mm)” | “1.2” “(30mm)” | 268W | 240V |
| “7/8” “(22.22mm)” | “1.2” “(30mm)” | 268W | 240V |
Technical Specifications
Heater Sheath: CrNi Steel
High Voltage Stability: 800VAC
Insulation Resistance: >= 5M ohm at 500 VDC (Cold)
Leakage Current: <= 0.5 mA at 250VAC (Cold)
Wattage Tolerance: +/- 2%, +/- 4%, or +/-10%
Maximum Voltage: 250V
Standard Connection: 72” to 500 deg. F
Feature
Positive locking positioning
Single allen screw adjustment for tightening and removal
Mini coils in direct contact with nozzle
Replaceable external thermocouple
Profiled for more heat at the Tip
Caps and Closure Applications
Close matching of Ohms so that multiple axial clamp heaters can be
controlled with a single thermocouple
Also used in Plastic molding for the cosmetic industry
Application
1. Injection Molding
2. Packaging
3. Automotive
