GE Mac1200 ECG Machine Thermal Print Head SHEC N216-8E-SHG 0061725 In Hospital Devices

GE Mac1200 ECG Machine Thermal Print Head SHEC N216-8E-SHG 0061725 Used in Good Working Hospital Devices

► Brief Introduction

The thermal print head temperature monitor measures the temperature of the heating head located on the print head. If the thermal print head temperature is too high, the signal REC_OVHEAT is activated and the signal STROBE is disabled to prevent the print head from heating up.

As the print head temperature increases, the heating time is reduced, thus maintaining normal font over the entire temperature range.

When the print head temperature drops below 50°C, the signal REC_OVHEAT_ is disabled and the heating is re-enabled by the signal STROBE.

►Specifications

►Safety Information

Warning

1. All installation, expansion, changes, modifications and maintenance of this product must be performed by Mindray authorized personnel.

2. High voltages are present inside the device. Do not remove the power supply or battery before disassembling the device.

3. When removing/reinstalling the parameter module, a patient leakage current test must be performed before it can be reused for monitoring.

4. The device must be connected to a properly installed outlet with only one protective ground. If your unit does not have a protective ground, disconnect it from the power cord and use battery power if possible.

5. Dispose of packaging materials in accordance with local waste regulations and keep out of the reach of children.

► Cleaning

To prevent wear and damage to the thermal head and ensure optimal performance and a long lifespan, clean the head surface with the provided thermal head cleaning pen after recording every 10 sets of paper.

1.Turn off the electrocardiograph before cleaning the thermal head.

2.Press the paper tray release button to open the paper tray.

3.Use the thermal head cleaning pen to clean the gray area of ​​the thermal head.

Any inquiry about GE Mac1200 ECG Machine Thermal Print Head SHEC N216-8E-SHG 0061725 Used in Good Working Hospital Devices, Medical Device Hospital Equipment​ will be highly appreciated and thanks for your support.

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.