Factory price 5 minutes epoxy resin/epoxy adhesive ab glue for
metal and glass
DY-N550 anaerobic thread sealant flange sealant adhesive
Medium strength Blue N242 thread locking adhesive for screw and nut
High quality 12pcs super glue
DY-N242 is kind of single component adhesive for sealing and
locking of screw threads with thixotropic, medium viscosity and
medium strength. It will harden doing on two matched metal surface
and isolated with air . Easy to remove with hand tools and avoid
the leakage and less of screw threads. It is applied on locking and
sealing for screw M6-M20 and prevent rusty. The typical usage is
locking for nut.
Time for beginning hardening: 10-15 minutes
Package: 10g/tube 20tubes/inner box 200 tubes/big box
50g/tube 10tubes/inner box 120tubes/big box
Dimensions: 54 * 31.5 * 32cm / 37.5 * 33 * 34.5cm
1. Clean the surface of object, keep it clean, dry and without oil.
2. Coat enough glue on the bolt to fill in all engaged screw
thread, the working effect will be better if glue line is below
0.055mm.
3. As to the big size screw threads, the bigger gap will influence
the bonding speed and strength. It will reduce the frictional force
emerged when assembling (Torque tension ration). It should be
confirmed does this ration need to lock the screw threads to
critical value.
How to use:
1. Clean the surface, keep dry and get rid of the grease, rust.
Otherwise, it would effect the solidifying speed a nd intensity.
For metal material, remove the oil and rust firstly, then wash the
surface with ethyl ester. For non metal, wash the surface with
methyl chloroform.
2. Use the cap to cut through the nozzle. Pile out the small
quantity glue liquid, drop the glue onto the surface (only
lubricate the surface), press and bond the material hardly.
3. The best time to use: at temperature 20~25°C, relative humidity
50%.
Warning:
1. Take precaution against touching by the hands or eyes. If does,
wash with dip in the water, do not peel the glue by force. If
getting in the eyes, wash with water at once then see the doctor
for further steps.
2. The glue has irritant odor. Keep the environment be ventilative
and wear glasses to protect the eyes during long term usage.
3. Tighten the lid carefully after applying.
4. Please keep out of the touching by kid.
Storage:
1. The product is nonflammable. Keep dry and out of light, low
temperature (20-25°C) during storage. The shelf life is one year.
2. If the glue does not solidifying beyond the shelf life, it could
be used still. But the solidifying speed and adhesive intensity
would be affected at some degree.
Scope Of Application:
This product could be applied to bond of metal, rubber, plastic,
wood, pottery in the fields of daily household repairing, arts
making and repairing, apparatus first orienting etc.
