| Indicator Item | Detailed parameters | Remarks |
| 1 | Input AC power | Three-phase power supply: AC ~ 380V ± 10%/50Hz Maximum input power: 9KW | |
| 2 | PC configuration requirements | WIN7 or above/4G operating memory/ 1T Hard Drive/Core I3 Processor | |
| 3 | Voltage output | Each channel measurement range: 0V-5V (continuously adjustable) Measurement accuracy: 0.05%RD ± 0.05%FS Stability: 0.05%RD ± 0.05%FS Minimum discharge voltage: 0V Control accuracy: 0.05%RD ± 0.05%FS Minimum resolution: 0.001V |
| 4 | Current output | Each channel measurement range: 1A-100A (continuously adjustable) Measurement accuracy: 0.05%RD ± 0.05%FS Stability: 0.05%RD ± 0.05%FS Control accuracy: 0.05%RD ± 0.05%FS Minimum resolution: 0.001A |
| 5 | Power | Maximum output power per channel: 0.5KW | |
| Channel input resistance | ≥ 100MΩ | |
| 6 | Current response time | ≤ 10ms(10% ~ 90% battery load, no overshoot) | High-speed dynamic response can meet the requirements of
high-standard measured conditions simulation test. |
| 7 | charge-discharge conversion time | ≤20ms (10% ~ 90% battery load, no overshoot) |
| 8 | Data logging frequency | Highest recorded frequency 20HZ 1. Time △t: 50ms ~ 3600S (time variation) 2. Voltage △U: 20mV ~ 100V (voltage variation) 3. Current △I: 100mA ~ 100A (current variation) |
| 9 | Display digits | 6 significant digits (voltage: ××××××; current: ×××××) |
| 10 | Step Jump Time | <1S | |
| 11 | Detection sampling mode | four-wire measurement | |
| 12 | Reference voltage | Adopt the US-specific benchmark integrated chip; Temperature coefficient: 5ppm/℃ (maximum) | |
| 13 | cut-off condition | Voltage, current, time, capacity, voltage change, T1, custom
variables, and other end conditions |
| 14 | Charging mode | Constant current charging, constant voltage charging, rate
charging, constant power charging, constant voltage current
limiting charging |
| 15 | Discharge mode | Constant current discharge, constant resistance discharge, rate
discharge, constant power discharge, constant voltage current
limiting discharge |
| 16 | Cycle test range | 1-99999 times, single loop work steps 254, with nested loop
function, maximum support 3 layers of nesting |
| 17 | Security Protection | Hardware over-voltage protection, hardware over-current protection,
short-circuit protection, reverse connection protection, power-down
data protection, over-discharge protection, under-current
protection, capacity protection, Setting parameters include: upper voltage limit, lower voltage
limit, upper current limit, lower current limit, delay time |
| 18 | Power failure protection | After the external power is cut off, the battery and the device are
automatically disconnected, effectively avoiding accidents caused
by re-powering; |
| 19 | CHANNEL FEATURES | Number of channels: 16 channels Channel features: constant current source and constant voltage
source with double closed-loop structure Control mode: independent control, independent programming | |
| 20 | Hardware Communication | Speed: 19.2KBPS Mode: Industrial high-speed isolation RS485(USB interface) | |
| 21 | Data sampling speed | 3 data/sec (per channel) |
| 22 | Alarm mode | Test completion reminder, safety protection alarm, abnormal error
alarm, bullet screen prompt information |
| 23 | upper computer software | LANBTS battery test system, WIN10 style, flat GUI design, Support control mode: start operation, normal stop, emergency stop,
automatic continuation, arbitrary jump, reset parameter start,
forced jump, channel change and other functions; Basic functions: cycle control, data analysis, centralized database
management, hierarchical curve, process curve, capacity overlay
curve, event recording, etc. |
| 24 | Programming Scheme | The scheme is independent, the work step scheme can be grouped,
modified, copied, shared, pasted, intelligent parameter input,
automatic completion, data recording mode can be set separately for
each step, intelligent cycle condition judgment control of various
variables N1/N2/C1/T1, |
| 25 | Real-time display | Current voltage, current, capacity, absolute time, number of
cycles, working state, operating mode, etc; The display block can be flipped to display, test scheme, variable
and energy information, etc., supporting dynamic real-time curve
display |
| 26 | Intelligent sorting function | Support a variety of intelligent sorting functions, such as
voltage, current, capacity, time and curve, sorting results prompt |
| 27 | Data Reporting
| Support single or multiple data save, multiple data save
automatically create a new folder, file name automatically added to
the start time and box number and channel number, easy to data
management |
| 28 | Data Backup | Data scheduled backup, power-down backup, computer crash backup |
| 29 | Data saving method | Users can customize the name and data save path, the data is saved
as a file. |
| 30 | Software Upgrade | Support network remote push, online upgrade; |
| 31 | Relative humidity of working environment | ≤ 85% RH (no water vapor condensation) |
| 32 | Operating temperature range | -10 ℃ ~ 50 ℃ (within the range, ensure the measurement accuracy) |
| 33 | Maintainability | Modular structure, available spare parts, spare parts for timely
replacement, maintenance, free of charge during the warranty
period. |
| 34 | Noise | <60dB |
| 35 | Cooling mode | forced air cooling |
| 36 | Unit cabinet size | Standard chassis, subject to physical |
| 37 | Output Battery Fixture | (user customized) copper nose |
| 38 | Extended functionality (optional) | Voltage and temperature auxiliary channels can be configured
according to the requirements (auxiliary channel 8CH/set, the user
can determine the number associated with the main channel) |
