1. General
•1.1 Inspection condition
Lighter: D65
Distance: 30CM visual
•1.2 Must be free of dirt, grease, oils, or other foreign
materials.
•1.3 Parts must be free of flash, short shots, sink or other
imperfections that may affect functionality of the part or has
potential to cause injury.
2. Function test
•2.1Vacuum leakage test
After filling with toothpaste, put the finish part with holding
pressure “-0.03MPa, 10 minutes”. The result is ok if there is no
leakage.
• 2.2 Drop test
After filling with toothpaste, free drop from height 0.5M. The
result is ok if there is no crack on the body.
3.Decoration
•3.1Shrinking sleeves inspection
1)Ensure the color and artwork consistent with customer sample.
2)Printing color tolerance: △Eab* ≤3.5
•3.2 Labelling
1) Ensure the color and artwork consistent with customer sample.
2) Printing color tolerance: △Eab* ≤3.5
