Product Description:
Product Introduction
The single-stage reverse osmosis system is a highly efficient water
treatment equipment that uses reverse osmosis membrane technology
to effectively remove ions and pollutants dissolved in water by
applying pressure to make water molecules pass through the
semi-permeable membrane. This technology can greatly reduce the
total dissolved solids (TDS), heavy metals and other harmful
substances in water, provide high-quality pure water, and is widely
used in industries, food and beverages, pharmaceuticals and other
fields.
Working Principle
The working principle of the single-stage reverse osmosis system is
based on the selective permeability of the reverse osmosis
membrane. When the raw water is pressurized by a high-pressure
pump, the water molecules are forced to pass through the reverse
osmosis membrane, while most of the dissolved ions, bacteria and
organic matter are blocked on the other side of the membrane,
thereby achieving water purification. The pore size of the reverse
osmosis membrane is small, allowing only water molecules to pass
through, while larger solutes are retained, forming two types of
water quality: purified pure water and concentrated water.
Working Steps
- Raw water
- Pretreatment
- Security filter
- High-pressure pump
- Reverse osmosis system
- Reinjection pump
- Purified water tank
Features:
Product Functions
The product is designed to meet the following functions:
- Removal of Dissolved Solids: Effectively remove salt, heavy metals, and other dissolved solids
in water.
- Microbial Control: Remove bacteria, viruses, and other microorganisms in water to
ensure the safety of water quality.
- Water Quality Improvement: Improve the conductivity and cleanliness of water to meet
industrial use standards and drinking standards.
- Wastewater Reuse: Suitable for the treatment and reuse of industrial wastewater to
reduce water resource waste.
Product Features
The product offers the following features:
- High Efficiency: Excellent desalination rate and water purification capacity, can
handle a variety of water sources.
- Skid Structure: Can be flexibly configured according to water demand, convenient
for expansion and maintenance.
- Advanced Control System: Equipped with intelligent monitoring and automatic control,
real-time monitoring of water quality and system operation status.
- Energy-Saving Design: Scientific and reasonable system design, low energy consumption,
low operating costs.
- Stable Water Output: Continuously provide stable high-quality water output to meet
various industrial needs.
Technical Parameters:
The equipment has a maximum operating temperature of 45℃, which
means it should not be exposed to temperatures beyond this limit
during operation. This is crucial in prolonging the lifespan of the
machine and avoiding any potential damage or malfunctions that
might occur due to overheating.
The maximum operating pressure for the equipment is 41bar, which is
the highest pressure that it can withstand without experiencing any
negative effects. It is important to make sure that the operating
pressure remains at or below this limit to prevent any damage to
the system.
The maximum pressure drop allowed for the equipment is 1bar. This
means that the pressure difference between the incoming and
outgoing fluid should not exceed 1bar. Keeping the pressure drop
within the specified limit is vital in maintaining the performance
of the machine.
The PH value range for continuous operation of the equipment is
between 2 to 11. Any value outside this range may negatively impact
the machine's performance and overall lifespan. Short-term cleaning
of the equipment requires a PH value range of 1 to 13, which should
be kept in mind during maintenance procedures or any other cleaning
operations.
The maximum water flow rate for the equipment is 4040 3.6t/h and
8040 19t/h. It is essential to ensure that the water flow rate
remains at or below this limit to prevent any damage or excessive
wear and tear to the machine.
The maximum water supply SDI is 5, meaning that the equipment can
only handle a certain level of particulate matter in the water
supply. Any level above this limit might lead to damage or clogging
of the system which can lead to inefficiency or malfunctioning of
the machine.
Finally, the allowable free chlorine content for the equipment is
limited to 0.1ppm. This is to ensure that the machine is not
exposed to excessive chlorine levels, which can damage or corrode
the system components.
Equipment Specifications:
- Maximum operating temperature: 45℃
- Maximum operating pressure: 41bar
- Maximum pressure drop: 1bar
- PH value range (continuous operation): 2~11
- PH value range (short-term cleaning): 1~13
- Maximum water flow rate: 4040 3.6t/h; 8040 19t/h
- Maximum water supply SDI: 5
- Allowable free chlorine content: 0.1ppm
Applications:
Application Scope
Our system can be applied to a wide range of industries to fulfill
various needs:
- Desalination of seawater and brackish water
- Chemical industry: used for chemical reaction and cooling
circulating water treatment to ensure the stability of the
production process.
- Electronic industry: used for the preparation of industrial pure
water and electronic grade high-purity water to ensure the
cleanliness of the production environment.
- Food and beverage industry: purify production water to meet food
safety standards.
- Pharmaceutical industry: provide high-purity water that meets the
requirements of drug production to ensure product quality.
- Environmental protection industry: sewage reuse treatment and
special separation to help enterprises reuse and save resources.
System Design
Our system is designed with the following components to ensure a
smooth operation:
- Raw water tank design with liquid level control
- Raw water pump design
- Pretreatment design
- Reverse osmosis design
- Production water tank design
Support and Services:
Our Industrial Reverse Osmosis Systems are designed to remove
impurities and contaminants from water, providing clean and safe
water for various industrial applications. Our systems are equipped
with advanced technologies such as high-pressure pumps, membranes,
and automatic flushing systems to ensure efficient operation and
minimal maintenance needs.
We offer a range of technical support and services for our
Industrial Reverse Osmosis Systems, including:
- Installation and commissioning
- System troubleshooting and diagnostics
- Membrane cleaning and replacement
- System upgrades and retrofits
- Remote monitoring and support
- On-site maintenance and repairs
Our team of experienced technicians and engineers are available to
provide prompt and reliable support to ensure optimal performance
and longevity of your Industrial Reverse Osmosis System.
