Product Description:
The single-stage reverse osmosis system is an efficient water
treatment equipment that utilizes reverse osmosis membrane
technology to eliminate dissolved ions and pollutants in water.
This technology applies pressure to make water molecules pass
through a semi-permeable membrane. Through this process, the system
can greatly reduce the total dissolved solids (TDS), heavy metals,
and other harmful substances in water, providing high-quality pure
water. The single-stage reverse osmosis systems are widely utilized
in various industries, such as food and beverages, pharmaceuticals,
and many others.
Working Principle:
The working principle of the single-stage reverse osmosis system is
based on the selective permeability of the reverse osmosis
membrane. When the raw water is pressurized by a high-pressure
pump, it forces water molecules to pass through the reverse osmosis
membrane. In this process, most of the dissolved ions, bacteria,
and organic matter are obstructed on the other side of the
membrane, which leads to water purification. The pore size of the
reverse osmosis membrane is tiny, only permitting water molecules
to pass through and, at the same time, retaining larger solutes.
This results in two types of water quality: purified pure water and
concentrated water.
Working Steps:
The working steps for the single-stage reverse osmosis system are
as follows:
- Raw water
- Pretreatment
- Security filter
- High-pressure pump
- RO
After raw water enters the system, it is pre-treated, filtered
through a security filter, and then pressurized using a
high-pressure pump. The final step is through RO, where the water
is purified and made into purified pure water.
Features:
Product Functions
The product has various functions:
Removal of Dissolved Solids
The product is effective in removing salt, heavy metals, and other
dissolved solids in water, producing clean and safe water for
different uses.
Microbial Control
The product can remove bacteria, viruses, and other microorganisms
in water to ensure the safety of water quality, preventing health
issues and diseases caused by contaminated water.
Water Quality Improvement
The product improves water conductivity and cleanliness, ensuring
that it meets industrial use standards and drinking standards,
reducing the risks of health hazards and other issues.
Wastewater Reuse
The product is suitable for the treatment and reuse of industrial
wastewater, reducing water resource waste and promoting sustainable
water use.
Product Features
The product has the following features:
High Efficiency
The product has an excellent desalination rate and water
purification capacity, can handle a variety of water sources, and
produce high-quality water output.
Skid Structure
The product has a flexible skid structure that can be configured
according to water demand, convenient for expansion and
maintenance.
Advanced Control System
The product is equipped with an intelligent monitoring and
automatic control system, ensuring real-time monitoring of water
quality and system operation status for efficient management and
maintenance.
Energy-saving Design
The product has a scientifically-designed system that ensures low
energy consumption and operating costs, promoting sustainable use
of resources and environmental conservation.
Stable Water Output
The product can continuously provide stable high-quality water
output to meet various industrial needs, ensuring consistent water
supply and quality for different uses.
Technical Parameters:
The maximum operating temperature for this product is 45℃. This
means that the product should not be exposed to temperatures
exceeding 45 degrees Celsius.
Additionally, the maximum operating pressure for this product is
41bar. It is important not to exceed this pressure limit, as doing
so could result in damage to the product.
The maximum pressure drop allowed for this product is 1bar. It is
important to ensure that the pressure drop does not exceed this
limit, as excessive pressure drop can also cause damage to the
product.
The PH value range for continuous operation should be maintained
between 2~11. It is important to ensure that the PH level does not
fall outside this range for extended periods of time.
If the product needs to be cleaned, the PH value range for
short-term cleaning should be between 1~13.
The maximum water flow rate for this product depends on the model.
For the 4040 model, the maximum water flow rate is 3.6t/h, while
for the 8040 model, it is 19t/h.
The maximum allowable water supply SDI is 5. This means that the
water entering the product should have a maximum SDI of 5 to
prevent damage to the product.
Finally, the allowable free chlorine content should be no more than
0.1ppm. Excessive free chlorine content can damage the product.
Applications:
Application Scope
Desalination of seawater and brackish water is one of the main
applications for this system. It is also widely used in various
industries:
- Chemical industry: used for chemical reaction and cooling
circulating water treatment to ensure the stability of the
production process.
- Electronic industry: used for the preparation of industrial pure
water and electronic grade high-purity water to ensure the
cleanliness of the production environment.
- Food and beverage industry: purify production water to meet food
safety standards.
- Pharmaceutical industry: provide high-purity water that meets the
requirements of drug production to ensure product quality.
- Environmental protection industry: sewage reuse treatment and
special separation to help enterprises reuse and save resources.
System Design
The system design includes:
- Design of raw water tank (liquid level);
- Design of raw water pump;
- Design of pretreatment;
- Design of reverse osmosis;
- Design of production water tank.
Support and Services:
Our Industrial Reverse Osmosis Systems are designed for maximum
efficiency and reliability, providing high-quality water for a
variety of industrial applications. We offer comprehensive
technical support and services to ensure that our customers get the
most out of their system, including:
- Installation and commissioning
- Operator training
- Preventative maintenance programs
- Emergency repair services
- Replacement parts and consumables
- System upgrades and retrofits
Our team of experienced technicians and engineers are available to
assist with any questions or concerns that may arise, and we are
committed to providing timely and effective solutions to keep our
customers' systems running smoothly.
