Submerged arc furnace fittings ladle car
Overview:
Ladle car is a tool used to transport ladle.
In the past, when the capacity of electric arc furnace was small,
the ladle of electric arc furnace steel was often carried out by
lifting the ladle with a crane. Now, not only is the electric arc
furnace to large-scale development, but also due to the widespread
application of refining technology, the use of crane crane bag out
of steel has basically disappeared in steelmaking enterprises,
replaced by ladle cars, which are widely used.
Composition of ladle car:
A ladle car is a tool for transporting ladles.
The ladle car will transport the ladle to the position where the
EAF steel is produced, and the ladle will be transported to the
position far away from the EAF after the steel is produced. The
ladle filled with molten steel not only bakes the drawing car, but
also may cause damage to the ladle car when the ladle leaks steel
or sputters steel. To this end, it is necessary to ensure that the
ladle car has enough strength and stiffness, and there are
firebricks on the upper plane of the ladle car in order to protect
the car body and the drive device.
Whether it is a sliding line type steel truck or a reel type ladle
car, the mechanism is basically composed of the car body, ladle
support, wheels, electrode reducer, transmission shaft and
coupling, cable and argon conveying device, weighing device and
traction device.
