Vacuum high pressure gas quenching furnace
Titanium Slag Furnace Heat Treatment Gas Cooling Oil Quenching 12
bar 15 bar for tools mold heat treatment Vacuum gas quenching
furnace
Application:
Mainly used for vacuum quenching, annealing, tempering, and
solution treatment of metal materials such as high-speed tool
steel, die steel, and martensitic stainless steel. It can also be
used for sintering and vacuum brazing of powder metallurgy products
and magnetic materials.
Advantages and features:
New heating chamber structure, more uniform heating, low power
loss, and more energy-saving.
According to the different cooling speed requirements of parts, it
is equipped with a high-efficiency copper fin heat exchanger with
adjustable cooling speed, which can realize processes such as
graded quenching and isothermal quenching.
The furnace door is equipped with a unique sealing structure to
ensure positive and negative pressure bidirectional sealing.
Options:
Furnace body form: vertical, horizontal.
Pressure: 2bar, 6bar, 10bar, 16bar.
Heating element: graphite; high-temperature molybdenum-lanthanum
alloy.
Heat insulation screen: insulation felt; metal screen.
Vacuum pump set: imported; domestic high-quality brand.
Technical Parameter:
Model | Working Zone Size (W*H*L) | MAX Temperature | Cooling Gas Pressure | Ultimate Pressure | Temperature Uniformity | Loading Capacity |
UNDQ-446 | 400*400*600mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 200Kg |
UNDQ-557 | 500*500*700mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 300Kg |
UNDQ-669 | 600*600*900mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 500Kg |
UNDQ-7710 | 700*700*1000mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 700Kg |
UNDQ-8812 | 800*800*1200mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 1000Kg |
UNDQ-9915 | 900*900*1500mm | 1350℃ | 6/10/15/20Bar | 6.7*10-4Pa/6.7*10-1Pa | ±5℃ | 1200Kg |
Remark: The working zone of equipment could be customized base on
customer’s production. |
Production workshop
After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's
plant.During the installation and commissioning period, the
commissioning personnel shall be provided free of charge by the
demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's
notification, both within a week to carry the equipment out of the
box together, then check the equipment and all components according
to the packing list . Including equipment accessories, spare parts
and special tools, attached manual and technical documents, etc. It
can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff
training to customer. The operating personnel of the customer
should join to commission,test the furnace, when installing at
customer’s company.
This is practical operation training and practical maintenance
training,and our technical personnel will telling the basic
principle,equipment maintenance knowledge,And the common fault
handling measures.We can training 2 ~ 3 workers. ( Training how to
maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts
from the date of installation and debugging of the supplier.
Equipment failure happens, after-sales service personnel shall give
solutions within 2 hours, after receiving the buyer's notification
. If it is need to go to the site for treatment , operators
dispatched by seller should arrive at the site within 48 hours
after go aboard. In case of emergency,operators should arrive at
the site within 48 hours after go aboard, and continue to make
repairs until the fault is removed and the equipment returns to
normal.
