Industrial gigabit 12 port din rial switch managed
optical bypass ethernet switch POE switch
Key Features of 10/100/1000mbps Fiber bypass managed switch
- 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 2 x2.5G SFP fiber ports, 2 x Bypass ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- Operating environment temperature:-40 ° ~75 ° c
Specification of Gigabit Ethernet Switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Bypass Switch (2F+8TP) |
| Model No. | IM-FBS288GW |
| Port | 2 x 2.5G SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km;
8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP,
IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344,
IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af,
IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table | 8K |
| Switching features | Transmission mode:storage and forward System bandwidth:58Gbps (non-traffic jam) DRAM size: 128M Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber, bypass |
| Power supply | Input voltage: DC 48-52V; No-load power: 5W; Reverse connection: support |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C;Working
humidity:10%～90%, non-condensing; Storage humidity:10%～95%,
non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC
60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail
Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; |
| Warranty | 3 years |
Connection diagram of Optical Fiber Bypass
About Olycom
- Olycom manufactures and markets fiber optic connectivity devices.
- Olycom provides solutions and services of industrial fiber switch,
fiber to copper media conversion, Ethernet networking, and CCTV
video surveillance.
- Olycom currently focuses on
Industrial Networking
Optical Bypass
WDM Equipment
Optical Monitoring Systems
POE++
FAQ
1. What is the power input?
A: For non-PoE managed switches, it receives DC12V~52V, for PoE
managed switches, it receives DC48V~52V.
All the models support redundant input.
2. What is the PoE budget?
A: The standard PoE output is 30W per port.
Take IM-FP288GW for example, it has 8 PoE ports, so the budget is 30W/port*8
ports=240W.
We can also support 60W output if it is required, please confirm
with us.
3. How can I install the device?
A: Each model in this series supports DIN35/Wall mounting.
It requires necessary accessories in installation like screws,
mounting kit etc., some of them are included in the packing box,
some are not.
4. Does your switch support 155Mb/s tranceivers?
A: Yes, the optical speed is 100M/1000M/2500M. Please just
configure 100M speed in the management interface, megabit modules
are working.
5. If possible to write the label as I want?
A: Yes, please just send the content and format, and we will print
a sample piece for your confirmation.
The label is usually attached to the side panel.
