Ultrasonic Precision Coronary Stent And Peripheral Stent Spraying
Coated System Various Frequency for Option
Description:
Ultrasonic stent spraying equipment uses high-frequency vibration
of ultrasound to disperse water and liquid, forming tiny particles
ranging from a few micrometers to over 100 micrometers in size. It
has the characteristics of supporting multiple series and types of
stents, high drug utilization rate, controllable drug dosage, and
uniform stent film layer.
Unlike the traditional spray head, which relies on pressure and
high-speed movement to crush liquid into small particles, the
ultrasonic spray head uses lower ultrasonic vibration energy to
atomize liquid. The liquid can be delivered to the spray head
through its own gravity or low-pressure liquid pump to achieve
continuous or intermittent atomization.
Parameters:
| Product Type | Stent Ultrasonic Coating System FS1006 |
| Spray Nozzle Operating Frequency | 120KHz (Optional 100150Khz) |
| Nozzle Power | 1-15W |
| Continuous Spraying Volume Max | 0.01-2ml/min |
| Effective Spraying Width | 1-5mm |
| Spray Uniformity | ≥95% |
| Solution Conversion Rate | ≥95% |
| Dry Film Thickness | 20nm-100μm |
| Solution Viscosity | ≤10cps |
| Temperature Range | -10-60℃ |
| Atomized Particles (Median Value) | 10-25μm (distilled water), determined by the frequency of the
nozzle |
| Diversion Pressure Max | ≤0.05MPA |
| Input Voltage | 220V±10%/50-60Hz |
| Control Mode | X-axis servo motor+rotating R-axis, action can be independently
programmed |
| Control Content | PLC control, touch screen+buttons |
| Liquid Supply Method | Precision injection pump |
| Operation | Clamp at both ends, supporting the lifting and clamping of excess
conduit coils |
Features:
1. According to different spraying applications, there are wide
width spraying suitable for large-area film spraying, scattering
spraying suitable for large-area spraying, gathering spraying
suitable for large-area spraying, long nozzle spraying suitable for
probing spraying, line spraying suitable for fine line spraying,
vortex spraying suitable for flat object spraying, etc.
2. Currently, commonly used frequencies include 25kHz, 30kHz,
40kHz, 50kHz, 60kHz, 100kHz, 120kHz, 150kHz, and 200kHz
3. Fine atomized particles, even atomized particles, can achieve
intermittent or continuous spray
4. It can achieve high-precision and highly controllable spraying,
reducing raw material consumption
Ultrasonic Precision Coronary Stent And Peripheral Stent Spraying
Coated System Various Frequency for Option
