1-Port 802.3bt PoE++ to 4-Port 802.3af/at Gigabit Industrial PoE
Extender
Specification of 90W PoE Extender
| Product Name | 10/100/1000Mbps Industrial PoE/PD Ethernet Switch(5TP) |
| Model No. | IM-WPD054GE |
| Port | 5 x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(POE) IEEE 802.3at 30W(POE+) IEEE 802.3bt 90W(POE++) |
| Switching features | Transmission mode: Storage and forward Forwarding delay: <10us System bandwidth: 10Gbps(non-traffic jam) Forwarding rate: 14.88Mpps MAC: 2K Packet buffer size: 1.75Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network PWR: Power Copper orange: Speed indicator On:Working speed is 1000Mbps Off:Disconnected or working speed is 10/100Mbps Copper green: Link/Act indicator On:transmission is normal Blinking: in transmission Off:transmission is NOT normal |
| Power supply | Single PoE input power: 30W/60W/90W(port 5) Single PoE output power: 15.4W/30W(port 1~4) Single PoE output voltage: DC48V(port 1~4) |
| PoE wiring | PoE af/at: 1/2 (V+), 3/6 (V-) PoE bt: 1/2 (V+), 3/6 (V-), 4/5 (V+),7/8 (V-) |
| Environment | Working temperature: -40°～75°C Storage temperature: -40°～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD:IEC61000-4-2,±15KV air, ±6KV contact EFT:IEC61000-4-4, General ±6KV Surge: IEC61000-4-5,Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B (Class B) ANSI C63.4:2014 |
| Mechanical information | Shell: Corrugated metal shell Safety class: IP40 Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
1. Q: Does this industrial 4-port PoE extender support 24VDC power
output?
A: No, this product doesn't support passive 24VDC PoE devices, and
it supports standard IEEE802.3af/at PoE 48VDC devices only.
A PoE splitter is required if you need to connect a 24VDC based PD
device.
2. Q: Is it a managed industrial network switch?
A: It is unmanaged industrial PoE switch and no need any setting,
plug and play, easy to use.
3. Q: Can I use it with one Non-PoE devices?
A: Yes, sure. If one Non-PoE devices is connected with this
industrial 5port PoE switch.
The industrial 5 port PoE switch will provide data only, and don't
provide power any more.
4. Q: Can it work with 10/100Mbps devices?
A: Yes, Ethernet port speed is auto-adaptive, it is seamless
connection with extra settings.
Application of 4-port PoE Switch
Key Features of Long Reach PoE Kit
- Support power on PoE IP cameras through the wireless access point
(AP) of 5 categories of Ethernet cable.
- IEEE 802.3 af/at power on/to 1 ~ 4 RJ45 ports
- IEEE 802.3 af/at/bt power on port 5
- 5 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 6 KV Ethernet surge protection, adapt to a harsh outdoor
environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard,
half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- Operating environment temperature: -40℃~75℃
| IM-WS050GE | Industrial Ethernet Switch 5*100/1000M, Unmanaged, Non-PoE, DC12V~DC52V dual input Ideal in vehicle network or industrial automation system |
| IM-WP054GE | Industrial PoE Switch 5*100/1000M, Unmanaged, PoE af/at for port 1~4, 120W budget,
DC48V~DC52V dual input Remark: PoE bt*60W is optional Ideal in CCTV security system |
| IM-WP054BGE | Industrial PoE Switch 5*100/1000M, Unmanaged, PoE af/at for port 1~4, 120W budget,
DC12V~DC48V dual input With internal power booster Ideal in solar power system |
IM-WPD054GE
| Industrial PoE Switch 5*100/1000M, Unmanaged, 1*PD port(30W/60W/90W)+PoE af/at for port
1~4 No need to use extra power supply Ideal in CCTV security system |
FAQ
What incoterms do you support?
We are an EXW factory, EXW term is our focus.
Sometimes we do FOB/CIF for bulk orders, this depends on cases.
Please talk with us for more information.
Do you attend some exhibitions?
Yes, we regularly attend IFSEC UK, MIPS RUSSIA, Security ESSEN
GERMANY and ISC West USA.
Sometimes we are an exhibitor for some small shows like Mitec
Malaysia, Secon Korea and Intersec Saudi Arabia.
Each time, we took many photos for displaying and record, please
let us know if you need to check.
Can I visit your factory?
Sure. Each year there will be some important clients visiting us
for new models and enhancing our business relationship.
Please let us know if you have a plan.
Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production
area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
