Corrtest 1A 10V multichannel potentiostat CS310X 4-channel 1 eis has slots. Multichannel potentiostat/ galvanostat model CS310X
(Option A: 4-channel 1 eis) is the 4-channel potentiostat. Four
slots are occupied with potentiostat boards. The rest four slots
are idle to add the potentiostat channels in the future. 1A 10V
multichannel potentiostat CS310X 4-channel 1 eis equals that you
have four sets independent potentiostat/galvanostat integrated in
one chassis. Compared with 4 sets single-channel
potentiostat/galvanostat, a set 4-channel potentiostat will cost
you much less. EIS (10μHz~1MHz) is included in ONLY ONE channel.
Each channel potential control range is ±10V, current control range
±1A. Full floating module and electrical isolation design guarantee
each channel is totally independent, which ensures accurate data
and efficient simultaneous measurements. Multichannel potentiostat
CS310X 4-channel 1 eis will especially make your testings more
efficient when you have various samples to be tested. You can use
one computer to control the 4 channels, you can also allocate and
control the channels by multiple computers.
Advantages of multichannel potentiostat CS310X 4-channel 1 eis
High current/voltage: Applied potential range ±10V, current ±1A. It
can meet the needs of most studies.Comprehensive techniques: There
are comprehensive techniques in each channel. Built-in EIS
(10μHz~1MHz) is equipped in only one channels
Warranty: 5 years warranty. We're the manufacturer, and our
engineers will provide technical support anytime you need.Low cost:
The price of multichannel potentiostat CS310X 4-channel 1 eis
includes instrument host, software (experiment control & data
processing), necessary cables, dummy cell. No other charges.
Application of multichannel potentiostat CS310X 4-channel 1 eis
● Study of Energy materials (Li-ion battery, solar cell, fuel cell,
supercapacitors), advanced functional materials
● Electrocatalysis (HER, OER, ORR, CO2RR, NRR)
● Corrosion study and corrosion resistance evaluation of metals;
quick evaluation of corrosion inhibitors, coatings, and cathodic
protection efficiency
● Electrosynthesis, electroplating/electrodeposition, anode
oxidation, electrolysis
Specifications of 1A 10V multichannel potentiostat CS310X 4-channel
1 eis
| Specifications |
| Number of channels with boards: 4 | Channel insulation resistance: >100MΩ |
| Communication: Ethernet | Lower-pass filter: covering 8-decade |
| Potential control range: ±10V | Constant current control range: ±1A |
| Potential accuracy: 0.1%×full range±1mV | Current accuracy: 0.1%×full range |
| Potential resolution:10μV(>100Hz), 3μV(<10Hz) | Current resolution: 1pA |
| Potential rise time: <1μs(<10mA), <10μs(<2A) | Current range: 2nA ~1A, 10 ranges |
| Reference electrode input impedance: 1012Ω||20pF | Maximum current output: 1A |
| Compliance voltage: ±21V | Current increment during scan: 1mA @1A/ms |
| CV and LSV scan rate: 0.001mV~10000V/s | Potential increment during scan: 0.076mV@1V/ms |
| CA and CC pulse width: 0.0001~65000s | DPV and NPV pulse width: 0.0001~1000s |
| SWV frequency:0.001~100KHz | CV minimum potential increment: 0.075mV |
| AD data acquisition:16bit@1MHz,20bit @1kHz | IMP frequency:10μHz~1MHz |
| DA resolution:16bit, setup time:1μs | Current and potential range: automatic |
Operating System requirements: Windows 10 /11 | Weight: 12.5 Kg Dimensions: 40*40*14cm |
| Electrochemical Impedance Spectroscopy (EIS) |
| Signal generator |
| Frequency range: 10μHz~1MHz | AC signal amplitude: 1mV~2500mV |
| Frequency accuracy: 0.005% | Signal resolution: 0.1mV RMS |
| DDS output impedance: 50Ω | DC Bias: -10V~+10V |
| Wave distortion: <1% | Waveform: sine wave, triangular wave, square wave |
| Scan mode: Logarithmic/linear, increase/decrease |
| Signal analyzer |
| Maximum integral time:106 cycles or 105s | Measurement delay:0～105s |
| Minimum integral time:10ms or the longest time of a cycle |
| DC offset compensation |
| Potential compensation range: -10V~+10V | Current compensation range: -1A~+1A |
| Bandwidth adjustment: automatic and manual, 8-decade frequency
range |
Techniques -multichannel potentiostat CS310X 4-channel 1 eis
Stable polarization | Open Circuit Potential (OCP) |
| Potentiostatic (i-t curve) |
| Galvanostatic(E-t curve) |
| Potentiodynamic(Tafel) |
| Galvanodynamic |
Transient polarization | Multi-Potential Steps |
| Multi-Current Steps |
| Potential Stair-Step (VSTEP) |
| Galvanic Stair-Step (ISTEP) |
Chrono methods | Chronopotentiometry (CP) |
| Chronoamperometry (CA) |
| Chronocoulometry (CC) |
| Voltammetry | Cyclic Voltammetry (CV) |
| Linear Sweep Voltammetry (LSV)(I-V curve) |
| Staircase Voltammetry (SCV) # |
| Square wave voltammetry (SWV) # |
| Differential Pulse Voltammetry (DPV)# |
| Normal Pulse Voltammetry (NPV)# |
| Differential Normal Pulse Voltammetry (DNPV)# |
| AC voltammetry (ACV) # |
| 2nd Harmonic A.C.Voltammetry (SHACV) |
| Amperometry | Differential Pulse Amperometry (DPA) |
| Double Differential Pulse Amperometry (DDPA) |
| Triple Pulse Amperometry (TPA) |
| Integrated Pulse Amperometric Detection (IPAD) |
EIS /Impedance | Potentiostatic EIS (Nyquist, Bode) |
| Galvanostatic EIS |
| Potentiostatic EIS (Optional freq.) |
| Galvanostatic EIS(Optional freq.) |
| Mott-Schottky |
| Potentiostatic EIS vs. Time (Single freq.) |
| Galvanostatic EIS vs. Time (Single freq.) |
Corrosion measurement | Cyclic polarization curve (CPP) |
| potentiodynamic(Tafel ) |
| Linear polarization curve (LPR) |
| Electrochemical Potentiokinetic Reactivation |
| Electrochemical Noise (ECN) |
| Zero resistance Ammeter (ZRA) |
| Battery test | Battery charge and discharge |
| Galvanostatic charge and discharge (GCD) |
| Potentiostatic Charging and Discharging(PCD) |
| Potentiostatic Intermittent Titration Technique(PITT) |
| Galvanostatic Intermittent Titration Technique(GITT) |
Simultaneous Measurements
There are 4 independent channel for multichannel potentiostat
CS310X. Each channel is a set potentiostat/galvanostat. So when you
have multiple samples, you can connect each sample to each channel,
and do the testing in parallel.
You can run a same experiment for each channel at the same time.
Set the same parameters for
each experiment once and run all independently. It's especially
useful when you have many samples for one single test.
You can also choose different techniques in each channel. Set the
parameters for each
experiment one by one, and run each experiment independently. As is
shown in right picture, EIS, Galvanostatic charge & discharge,
Cyclic Voltammetry, and polarization curve test are tested.
Advantages of Corrtest 1A 10V multichannel potentiostat CS310X
4-channel 1 eis
Full floating
All Corrtest potentiostats / galvanostats including 1A 10V
multichannel potentiostat CS310X 4-channel 1 eis are designed as
full-floating, and can be used for electrochemical study of working
electrode connecting to earth, such as autoclave, metal part in
bridge, concrete
Real-time data storage
Experiment data can be stored in real time. Even if the test is
interrupted by a power failure, the data will be automatically
saved. The data is compatible with Excel, Origin, and can be
directly opened.
EIS
● Corrtest 1A 10V multichannel potentiostat CS310X 4-channel 1 eis
uses correlation integral algorithm and dual-channel over-sampling
technique, and has strong anti-interference ability. The internal
resistance of the instrument is up to 1013Ω. It's suitable for EIS measurements of high-impedance system
(such as coating, concrete etc.)
● With constant current carrier and DC bias technology, Corrtest
potentiostat can be used for battery impedance measurement under
charge and discharge state, suitable for ultra-low resistance
system (such as 18650 battery, soft pack battery, battery core...)
Multi electrode system
● Support 2-, 3-, 4-electrode system, can be used to test battery
internal resistance or 4-electrode thin film impedance measurement
● With Zero resistance ammeter for galvanic current measurement
Software development kit(SDK)
We can provide secondary development interfaces,API general
interfaces and development examples, and can realize data call for
Labview, C, C++, C#, VC and other program, which is convenient for
secondary development and test methods customization.
High current options
●With the CS2020B/CS2040B booster, the current of multichannel
potentiostat CS310X can be boosted to 20A/40A, which meets the
requirement in fuel cell, power battery, electroplating, etc
Versatile data analysis
CS Studio is the software for Corrtest potentiostat incl.
multichannel potentiostat CS310X 4-channel 1 eis for experiment
control and data analysis. It can do: multi-parameter Tafel curve
fitting, derivation, integration and peak height analysis of
voltammetric curve, EIS equivalent circuit customization and
impedance spectrum fitting, etc.
● Multi-parameters Polarization curve
● EIS fitting
● Electrochemical noise analysis
● Pseudo capacitance calculation
● GCD specific capacitance, efficiency
● Mott-Schottky plot analysis
● CV analysis
Combination test
CS studio software supports the combination test for various
experiments to achieve flexible and
unattended test. You can set the parameters for each experiment in
advance, and set the intervals, wait time etc between each
experiment.
Combination Test: corrosion tests
Combination Test: Pseudo capacitor tests
Q: What’s the standard supply for multichannel potentiostat CS310X
4-channel 1 eis
A: Standard supply for multichannel potentiostat CS310X 4-channel 1
eis:
Instrument host CS310X-1set
CS studio testing & analysis software-1set
Power cable - 1 piece,
Ethernet cable - 1 piece
Cell cable –8 pcs,
Dummy cell –4
Manua
Q: How about delivery and after-sales service?
A: Usually we deliver multichannel potentiostat CS310X within 2
weeks. The goods are delivered by express such as DHL, FedEx.
After-sales Service (all the service, repair is totally free):
Warranty period: 5 years.
Provide installation guide, manual, software installation video &
training videos.
Free repair service
Lifetime software upgrading and technical service.
Q: Should I do the calibration for multichannel potentiostat CS310X
before measurement?
A:Before shipment, multichannel potentiostat CS310X are already
tested and calibrated by the engineers, so the customers don't need
to do calibration. They can use the potentiostat directly. They may
just need to use the dummy cell to judge whether the potentiostat
is functioning well.
Q: Can I upgrade the multichannel potentiostat CS310X 4-channel 1
eis into 4 channel 4 eis?
A: Yes. We can do it online. You need to buy EIS modules. If you
need more channels, we will deliver the potentiostat boards to you
and you can install it.
Q: Can I install and view the software without connecting
multichannel potentiostat CS310X before purchase?
A: Yes. We can send the software package for your installation, and
then please follow the steps to use the demo mode without
connecting a Corrtest multichannel potentiostat CS310X.You can see
the layout of the software.
