Battery testing multichannel potentiostat 8 channel potentiostat
CS310X is a versatile instrument offering 8 slots. It is the 8-channel
potentiostat when all the slots are occupied with potentiostat
boards. It equals to 8 sets independent potentiostat/galvanostat,
and they’re integrated in one chassis. Multichannel potentiostat 8
channel potentiostat CS310X can achieve simultaneous measurement in
each channel because each integrated potentiostat/galvanostat is
independent. Battery testing multichannel potentiostat 8 channel
potentiostat CS310X brings convenience to those who have many
samples, and is an ideal device for studies of energy materials,
battery testing. In each channel of the multichannel potentiostat,
there are all typical techniques used in battery testing such as
cyclic voltammetry (CV), Galvanostatic charge and discharge (GCD),
Potentiostatic Intermittent Titration Technique (PITT),
Galvanostatic Intermittent Titration Technique (GITT) etc. For each
channel the potential control range is ±10V, current control range
±1A.
EIS module (10μHz~1MHz) is equipped in one or all 8 channels. Full floating module and electrical isolation design guarantee each
channel is totally independent, which ensures accurate data and
efficient simultaneous measurements.
Standard supply of Battery testing multichannel potentiostat 8 channel potentiostat
CS310X
8 channel potentiostat host -1 set,
CS studio software*1,
Electrode cable *16 pcs,
Dummy cell *8 pcs,
Power cable *1 pcs,
Ethernet cable *1 pcs, Manual
Battery testing multichannel potentiostat 8 channel potentiostat
CS310X can be used for the following applications:
● Study of Energy materials (Li-ion battery, solar cell, fuel cell,
supercapacitors), advanced functional materials
Besides energy and battery field, you can also use it for the other
applications and you can test multiple samples at the same time in
each channel, which saves your time.
● Electrocatalysis (HER, OER, ORR, CO2RR, NRR)
● Corrosion study and corrosion resistance evaluation of metals;
quick evaluation of corrosion inhibitors, coatings, and cathodic
protection efficiency
● Electrosynthesis, electroplating/electrodeposition, anode
oxidation, electrolysis
Advantages of Battery testing multichannel potentiostat 8 channel
potentiostat CS310X
High current/voltage: Applied potential range ±10V, current ±1A. It
can meet the needs of most studies.Comprehensive techniques:
Built-in EIS (10μHz~1MHz) is equipped in one or all 8 channels. It
support customization of the number of EIS modules. There are
comprehensive techniques in each channel.
Low cost: The price of Battery testing multichannel potentiostat 8
channel potentiostat CS310X includes instrument host, software
(experiment control & data processing), necessary cables, dummy
cell. No other charges. The average cost for each channel is much
lower than a single-channel potentiostat.
Warranty: 5 years warranty. We're the manufacturer, and our
engineers will provide technical support anytime you need. All the
technical support including repair is free. Electrochemical
accessories can be provided with very low low cost. Reliability
&quality: We've been in the market for 20 years, and now is the
No. 1 brand of potentiostat product in China
Specifications of Battery testing multichannel potentiostat 8
channel potentiostat CS310X
| Specifications |
| Number of channels with boards: 8 | Channel insulation resistance: >100MΩ |
| Communication: Ethernet | Lower-pass filter: covering 8-decade |
| Potential control range: ±10V each channel | Constant current control range: ±1A each channel |
| Potential accuracy: 0.1%×full range±1mV | Current accuracy: 0.1%×full range |
| Potential resolution:10μV(>100Hz), 3μV(<10Hz) | Current resolution: 1pA |
| Potential rise time: <1μs(<10mA), <10μs(<2A) | Current range: 2nA ~1A, 10 ranges |
| Reference electrode input impedance: 1012Ω||20pF | Maximum current output: 1A |
| Compliance voltage: ±21V | Current increment during scan: 1mA @1A/ms |
| CV and LSV scan rate: 0.001mV~10000V/s | Potential increment during scan: 0.076mV@1V/ms |
| CA and CC pulse width: 0.0001~65000s | DPV and NPV pulse width: 0.0001~1000s |
| SWV frequency:0.001~100KHz | CV minimum potential increment: 0.075mV |
| AD data acquisition:16bit@1MHz,20bit @1kHz | IMP frequency:10μHz~1MHz |
| DA resolution:16bit, setup time:1μs | Current and potential range: automatic |
| Operating System requirements: Windows 10 /11 | Weight: 12.5 Kg Dimensions: 40*40*14cm |
| Electrochemical Impedance Spectroscopy (EIS) |
| Signal generator |
| Frequency range: 10μHz~1MHz | AC signal amplitude: 1mV~2500mV |
| Frequency accuracy: 0.005% | Signal resolution: 0.1mV RMS |
| DDS output impedance: 50Ω | DC Bias: -10V~+10V |
| Wave distortion: <1% | Waveform: sine wave, triangular wave, square wave |
| Scan mode: Logarithmic/linear, increase/decrease |
| Signal analyzer |
| Maximum integral time:106 cycles or 105s | Measurement delay:0～105S |
| Minimum integral time:10ms or the longest time of a cycle |
| DC offset compensation |
| Potential compensation range: -10V~+10V | Current compensation range: -1A~+1A |
| Bandwidth adjustment: automatic and manual, 8-decade frequency
range |
Techniques-Battery testing multichannel potentiostat 8 channel
potentiostat CS310X
Stable polarization
- Open Circuit Potential (OCP)
- Potentiostatic (I-T curve)
- Galvanostatic
- Potentiodynamic (Tafel plot)
- Galvanodynamic (DGP)
Transient Polarization
- Multi Potential Steps
- Multi Current Steps
- Potential Stair-Step (VSTEP)
- Galvanic Stair-Step (ISTEP)
Chrono Method
- Chronopotentiometry (CP)
- Chronoamperametry (CA)
- Chronocaulometry (CC)
Voltammetry
- Linear Sweep Voltammetry (LSV)
- Cylic Voltammetry (CV)
- Staircase Voltammetry (SCV) #
- Square Wave Voltammetry (SWV) #
- Differential Pulse Voltammetry (DPV) #
- Normal Pulse Voltammetry (NPV)#
- Differential Normal Pulse Voltammetry (DNPV) #
- AC Voltammetry (ACV) #
- 2nd harmonic AC Voltammetry (SHACV)
- Fourier Transform AC Voltammetry (FTACV)
Electrochemical Impedance Spectroscopy (EIS)
· Potentiostatic EIS (Nyquist, Bode)
· Galvanostatic EIS
· Potentiostatic EIS (Optional freq.)
· Galvanostatic EIS(Optional freq.)
· Mott-Schottky
· Potentiostatic EIS vs. Time (Single freq.)
· Galvanostatic EIS vs. Time (Single freq.)
Battery testing
- Battery Charge and Discharge
- Galvanostatic Charge and Discharge (GCD)
- Potentiostatic Charging and Discharging(PCD)
- Potentiostatic Intermittent Titration Technique (PITT)
- Galvanostatic Intermittent Titration Technique (GITT)
Corrosion Measurements
- Cyclic polarization curve (CPP)
- Linear polarization curve (LPR)
- Electrochemical Potentiokinetic Reactivation (EPR)
- Electrochemical Noise (EN)
- Zero resistance Ammeter (ZRA)
Amperometric
- Differential Pulse Amperometry (DPA)
- Double Differential Pulse Amperometry (DDPA)
- Triple Pulse Amperometry (TPA)
- Integrated Pulse Amperometric Detection (IPAD)
# There is corresponding stripping technique
Simultaneous Measurements
You can run a same experiment for each channel at the same time.
Set the same parameters for
each experiment once and run all independently. It's especially
useful when you have many samples for one single test.
You can also choose different techniques in each channel. Set the
parameters for each
experiment, and run each experiment independently. As is shown in
right picture, EIS, Galvanostatic charge & discharge, Cyclic
Voltammetry, and polarization curve test are tested.
Technical advantages
For the multichannel potentiostat 8 channel potentiostat CS310X, it
equals that you have 8 sets single-channel potentiostat. Each
potentiostat channel is totally independent. For each channel, it
has the following features:
1.Impedance (EIS)
Multichannel potentiostat 8 channel potentiostat CS310X applies
correlation integral algorithm and dual-channel over-sampling
technique, and has strong anti-interference ability. It is suitable
for EIS measurements of high-impedance system (>109Ω, such as coating, concrete etc.).
EIS of AA6063 Al alloy in Ce3+ containing 3% NaCl solution Polarization curve of Ti-based
amorphous alloy & stainless steel in 3%NaCl solution
2.Polarization curve
Tafel plot can be obtained. The user can set the anodic reversal
current (passivation film breakdown current) of the cyclic
polarization curve to obtain material’s pitting potential and
protection potential and evaluate the its susceptibility to
intergranular corrosion. The software uses non-linear fitting to
analyze polarization curve, and can make fast evaluation of
material’s anti-corrosion ability and inhibitors.
3.Voltammetry
In each channel of multichannel potentiostat 8 channel potentiostat
CS310X, it contains Linear Sweep Voltammetry (LSV), Cyclic
Voltammetry (CV), SCV, SWV, DPV, NPV, ACV, Stripping voltammetry
etc. It integrates calculation of peak area, peak current and
standard curve analysis.
LSV: mesoporous carbon material in 0.1M KOH CV of PPy
supercapacitor in 0.5 mol/L H2SO4
4.Full floating measurement
In each channel of multichannel potentiostat 8 channel potentiostat
CS310X Full-floating mode be used for autoclave electrochemical
measurements, on-line corrosion monitoring of metallic components
under the ground (rebar in concrete, etc.)
5.Software development kit (SDK)
We are able to provide API functions and development examples,
which facilitates some users’ requirements for secondary
development and self-defined measurements. We can provide .dll
file.
6.Real-time Data storage
The data can be automatically saved even in case of sudden power
off.
7.Higher current option
Multichannel potentiostat 8 channel potentiostat CS310X can be
connected with current booster to increase the current output to be
up to 20A/40A.
Software Features
Cyclic voltammetry: CS studio software provides users a versatile smoothing/differential/ integration kit, which can complete the calculation of peak height, peak area
and peak potential of CV curves. During the data analysis, there is
function of selecting exact cycle(s) to show. You can choose to see
a cycle or some cycles as you want. You can also export data or
vector graph of an exact cycle or several cycles.
Battery Test and analysis:
charge & discharge efficiency, capacity, specific capacitance,
charge & discharge energy.
EIS analysis: Bode, Nyquist, Mott-Schottky plot
During EIS data analysis, there is built-in fitting function to
draw the custom equivalent circuit.
Combination test: CS studio software supports the combination test for various
experiments to achieve flexible and unattended test. You can set
the parameters for each experiment in advance, and set the
intervals, wait time etc between each experiment.
Combination Test: Pseudocapacitor tests
