Rapid Temperature Change (Humidity)Test Chamber Overview
This test chambe is suitable for high temperature, low temperature, hot-humid and rapid temperature change (ESS) conditions test of the whole machine, parts and materials.
Features
| ☆ Homogenous temperature linear changing rates: 5℃/min, 10℃/min | ☆ Optional remote-assist service function and teaching CDs. |
| ☆ Fashionable desig of modular construction | ☆ Automatic reminder of equipment maintenance plans and software of recording malfunction |
| ☆ 7" colour touch screen display and 32 bit control system; interfce Ethernet/USB | ☆ Optional network video monitoring and data synchronization |
| ☆ Dry air blowing system prevents specimen's surfaces from dewing in rapid temperature change. | ☆ Intelligent and high-performance servo refrigerating control technology: energy saving and rapid heating/cooling rate |
| ☆ 4 load power outlets for specimens with programmable control for protection | ☆ Unique operation mode: make testing area's temperature back ro room temperature after tests are finished |
| ☆ Special air circulation system inside ensures testing accurancy. | ☆ Optonal APP mobility management |
| ☆ Desig with independent sensors to prevent specimens from damages caused by dewing, overheat, breezeless and smog | ☆ Automatic water supply with ultrapure filter devices; water shortage reminder function(ECS series) |
| ☆ Special anti-condensation structures design to avoid misjudgment and improve testing accuracy in climate testing | ☆ Strong control abilities of extreme-low humidity range 20℃/10% R.H..(ECS Series) |
Specifications
| | | | | | | |
| Test Space Volume (L) | | | |
| Temperature Test Parameters: |
| Temp. Range (℃) | | | | | | |
| Temp. Constancy (℃) | |
| Temp. Homogeneity (℃) | |
| Heating/Cooling down Rate(℃/min) | | | | | | |
| Test Space Dimension (mm) | | | |
| |
| |
| Model (10℃/min) | | | | | | |
| Model (15℃/min) | | | | | | |
| Temp. Test Parameters: |
| Temp. Range (℃) | | | | | | |
| Temp. Constancy (℃) | |
| Temp. Homogeneity (℃) | |
| Heating/Cooling Rate (℃/min) | | | | | | |
| Heating/Cooling Rate (℃/min) | | | | | | |
| Test Space Dimension(mm) | | | |
| Climate Test Parameters: (ECS Series) |
| Temp. Range (℃) | |
| Humid. Range (%RH) | |
| Dew Point Temp. Rate (℃) | |
| Humid. Constancy (%RH) | |
| Temp. Constancy (℃)) | |
| Temp. Homogeneity (℃) | |
| Cooling Methods | |
| Power | |
Options
☆ APP for mobility management
☆ Independent sensors for specimen protection (NE60519-2.1993)
☆ 1 Entry port Φ100mm Automatic water supply device
☆ Nitrogen gas auxiliary device
☆ Spare parts package
☆ E-management and cyber-software
☆ Video monitor system
Standard Version
☆ 2 Stainless steel shelves
☆ 3 Power outlets for test specimen
☆ 2 Silicon stoppers for entry ports
☆ Left and right entry ports
☆ Drier filter for compressing air
☆ 1 Water tank with 20L for ECS series
☆ 1 Water filter for ECS series
Temperature and Humidity Control Chart
1.Standard Model Well Function Range
2.Standard Model Max. Function Range
3.Enhanced Model humid. Range ( with air drier)
4.Enhanced Model humid. Range ( with air drier and capacitive measuring)
Structure
| 1, Structure Mode | Unitary.Test room is on the top, refrigerator is in the bottom; Power distribution control in the back; Main control panel in the front door, and the extended one is on the right-back side. Door opens from right to left. Air circulation channel and air conditioning system are at the back of test space:(centrifugal fan blade,air flow guiding device,heater,humidifier,Refrigeration heat exchanger,Temp and humidity sensing device. |
| 2, Composition | 2.1 Exterior material: Both sides static coated cold rolled steel 2.2 Interior material: SUS304 Stainless steel 2.3 Insulation material: Rigid polyurethane foam insulation layer |
| 3, Load-bearing | 3.1 Shelves load capacity:≤50Kg(averagely loaded) |
| | 3.2 Test case frame bearing capacity:≤20Kg(averagely loaded) |
| | 3.3 Test space total load weight(shelves and bottom)≤80kg |
| 4, Chamber door | 4.1 Single door with hinges on the left; 4.2 Door size:580×750 mm(W×H); 4.3 Silicon rubber equipped and heating system inside for anti-condensation; |
| 5. Observation window | Size:280×400mm(W×H), coated heating anti frost hollow glass |
| 6. Cable ports | 2 ports with Φ50 mm on left and right sides, with screw caps and Soft silicone plugs. |
| 7. Headlamp | In the observation window |
| 8. Shelves | 2 shelves inside for samples; height adjustable |
| 9. Drain Holes | Condensate water drain holes for condensate water outside |
| 10, Spill Port | Located at the back of case for condensate water discharging |
| 11. Mobile Castors | Strong adjustable wheels |
| 12. Separate Design Of Water/Electricity | Humidity system and electric control system are separated for safety(patent no.:ZL201220245236.8) |
Rapid Temperature Change and Climate Test Chamber...
