Laboratory Envsin GB2423.24 UV Lamp Chamber Sunlight Simulation

The solar simulation chamber can be used to evaluate the ability of equipment directly exposed to solar radiation in hot season to withstand the thermal effect or photochemical effect produced by solar radiation.The solar simulation chamber can test the heat dissipation test samples and non-heat dissipation test samples. For the test of heat dissipation test sample, the heat dissipation power can not exceedthe cooling capacity of the refrigeration system of the test chamber, because the control of temperature and humidity is a dynamic balance process, in different temperature and humidity points, the cooling capacity of the refrigeration system is also accompanied by changes.

• GJB150.7-86 solar radiation test
• Gjb150a.7-2009 Solar radiation test
• IEC60068-2-5 test Sa: surface solar radiation simulation
• GB2423.24 test Sa: Simulate the solar radiation on the ground
• DIN75220 automotive components in the sun simulation device changes
• Mil-STD 810G environmental engineering related matters and laboratory testing

Solar radiation test is a test that will directly harm the health of test personnel. In order to ensure that the prescribed test operation can be carried out correctly, but also for the health and safety of human beings, the operation model of solar radiation test equipment should be carried out by skilled test personnel, and pay attention to wearing protective equipment during the test.

​