FDB0216HF Optical Splitter NAP Box
The equipment is used as a termination point for the feeder cable
to connect with drop cable in FTTx communication network system.
The fiber splicing, splitting, and distribution can be done in this
box, and meanwhile it provides solid protection and management for
the FTTx network building.
16 Port FTTH Drop Cable Box Features
- Total enclosed structurewith key and buckles
- High strength engineer plastic,wet-proof, water-proof, dust-proof,
anti-aging
- Outdoor wall mount, pole mount or aerial mount, protection level up
to IP65
- Clamping for feeder cable and drop cable, fiber splicing, fixation,
storage, distribution…etc all in one
- Cable, pigtails, and patch cords are running through their own
paths without disturbing each other, easy maintenance.
- Distribution panel can be flipped up, feeder cable can be placed by
expression port, easy for maintenance and installation.
Specification
| Model | FDB0216HF-A | FDB0216HF-B | FDB0216HF-C | | Dimension (A*B*C) | 290*210*82mm | | Cable entry | 1 uncut port, 2 cable glands:ᴓ12.5-15 mm | | Cable exit | 16pcs 2x3mm flat ports with rubber boot | | Max.Capacity | 24core | 16cores | 16cores | | Adapter quantity | 16SC | 18SC | - | | Splitter quantity | 2pcs 1x8, or 1pc 1x16 mini splitter | 2pcs 1x8 mini splitter | 2pcs 1x8 or 1pc 1x16 LGX splitter | | Waterproof grade | IP65 | | Material | PC+ABS | | Color | black |
|
Product Details:
Cable ports
Cable entry: 2cable glands, 1uncut port, dia 13.5mm
Cable exit: 16pcs square flat drop cable ports 2.0*3.0mm
max.4pcs white optical fiber fusion tray with lid,standard is 2pcs,
ach tray capacity: 6core 1layer, dual layer 12core
the tray is clip fix on the back brackets, you can take it off for
fast and easy operation on site.
the bottom bracket have slots for steel tube and splitter input
side connectors, which ensure stability during long time
transportation, not fiber broken or mess. The adapter plate is
plastic, and can hold max. 16pcs SC adapters or LC duplex adapters.
There are holes and projections on the adapter panel to fix the
adapter, which can be fixed without screws. Only the protrusion
should be aligned with the screw hole on the adapter and the metal
spring piece of the adapter itself can be fixed.
The plate also can insert into the reserved hole to make it at
place,no need screws to fix.
There is cable clamps to fix on the cable on the stainless
brackets,total 4pcs cable entry: 1uncut port (mid span) and 2 cable
glands, 16pcs drop cable exit.
Total box is quite often use outdoor wall mount or pole mount, anti
UV, there is laser mark sticker inside of the cover. The box is
open and close by a screw rods in front and 2 Allen screws
(brackets) at both sides. Which make fast and safe construction for
FTTH.
There are three mode adapter panel for option: adapter plate with
2trays, adapter holder with tray, splitter cassette holder
Mounted method:
Standard accessory
Splice tray 2pcs, 4pcs wall mount expansion screws, 16pcs fiber
protective sleeve, 4pcs cable clamp,nylon ties, adapter plate for
16 x adapters, cable protection tube, key, PG 13.5 cable glands for
distribution ports, Pole mounted kits (optional).
Related products:
FTTH drop cable SC field fast connector SC optical coupler
FTTH drop cable Fiber optic pigtails Fiber optic PLC splitter
Application
- Wall-mounted, Pole-mounted Installation
- Suitable for ftth pre-connectorized drop cable with SC/LC
connectors
Actual pictures
