Side Ditches and Slope Protection for Railway Subgrade with
Slipform Paver
The application fields of three track cement sliding mode machine
are wide, mainly including the following aspects:
1. Road engineering
- Highway: Used for slip form construction of highway shoulders, side
ditches, crash barriers, etc.
- Municipal roads: construction of sidewalks, edges of non motorized
vehicle lanes, and road dividers.
2. Airport construction
- Forming construction of runway edges and taxiway edges.
- Construction of airport drainage facilities.
3. Water conservancy engineering
- Channel lining: Construction of concrete lining for irrigation
channels, flood discharge channels, etc. in farmland.
- Embankment slope protection: Enhance the stability and erosion
resistance of the embankment slope surface.
4. Port terminals
- Construction of protective structures for the dock shoreline.
- Construction of drainage ditches and other facilities in the port
area.
5. Railway engineering
Construction of side ditches and slope protection for railway
subgrade.
6. Industrial park
Construction of roads and drainage facilities within the park.
7. Underground pipe gallery
Construction of concrete structures around the pipe gallery.
Features:
1. Get in place quickly
The position of the mold can be adjusted left and right through the
hydraulic cylinder, which greatly shortens the time before
construction. The slipform machine can be used for paving under
various working conditions.
2. The conveying position can be adjusted
The screw feeding device adjusts the tilt angle and the front and
rear positions through the hydraulic cylinder to meet various
feeding conditions. During construction, the discharge port is located directly above
the mold hopper, and the rotation angle of the slipform machine can
be manually adjusted during transfer and transportation to narrow
the body.
3. Track offset function
The right rear track has a hydraulic offset function, which can
adjust the track spacing, which is convenient for transportation
and increases the paving width in the middle mode.
4. One machine with multiple functions
Mold Offset: For curbs, gutters, crash walls, etc.
Mold in the middle (optional): used for low-grade rural roads,
squares, sidewalks and agricultural irrigation canals with concrete
structures.
5. One machine with multiple modes
According to different construction requirements, a variety of
molds can be selected for users under reasonable design parameters. Improve paver utilization.
6. Full hydraulic drive
Imported brand load-sensitive variable pumps save energy and reduce
the temperature rise of the hydraulic system. Hydraulic valves and other imported brands are selected, with
superior and reliable performance. Vibrator adopts imported brand with excellent performance.
7. Milling function (optional, non-standard)
The leveler directly driven by the hydraulic motor has a compact
structure and strong power, which can mill the hard roadbed, make
the mold side plate at the back more consistent with the roadbed,
and reduce paving material leakage.
Technical Parameters:
No. | Project | Unit | Parameter |
Basic performance parameters |
1 | Max paving width | cm | 250 |
2 | Max paving height | cm | 130 |
3 | Work speed | m/min | 0～16 |
4 | Driving speed | km/h | 0～2.1 |
5 | Theoretical productivity | m3/h | 90 |
6 | hopper capacity | m3 | 2～10(Depends on the width of the mold) |
7 | Climbing ability | ％ | 20 |
8 | Diesel tank | L | 115 |
9 | Water tank | L | 284 |
10 | Hydraulic oil tank | L | 189 |
Engine performance parameters |
11 | Engine model | / | Weichai WP4.1G |
12 | Engine power | kW r/min | 73.5Kw/2300 |
13 | Engine type | / | 4-cylinder water-cooled |
14 | Emission standard | / | stage 3 |
Size parameters |
15 |
Dimensions (L x W x H)
| mm | 5400×3150×3300 |
16 |
Transport (L x W x H)
| mm | 5400×2150×2700 |
17 | Track (L x W x H) | cm | 163x30x63 |
Weight parameters of the whole machine |
18 | Weight | kg | 9000 |
Homework performance parameters - feeding |
22 | Spiral device speed | r/min | 0～60 |
23 | Spiral diameter | cm | 42 |
24 | Belt device speed | r/min | 0～100 |
Homework Performance Parameters - Mold |
25 | Number of molds | pcs | 1 |
26 | Construction form | / | Left side paving |
Performance parameters for homework - vibration compaction |
28 | Vibration rod frequency | Hz | 0～167 |
32 | Number of vibrator | pcs | 5 |
Homework Performance Parameters - Cleaning |
33 | Cleaning form | / | High pressure cleaning |
34 | Cleaning pressure | Mpa | 5 |
Hydraulic system |
35 | Quantity of hydraulic pumps | pcs | 2 |
36 | Hydraulic oil cooling | / | Large size radiator, forced air cooling |
37 | Maximum filtering accuracy | / | 10μm |
Construction case:
