Hydraulic Pump Test Bench
structural characteristics.
1.
The electric motor is the driving system of the whole test bench.
This test bench can be divided three parts: electric motor
platform, oil tank platform, control cabinet. The structure has
characteristics of small size, light weight, compact structure, and
easy installation, etc.
2.
It uses the design of hydraulic integrated block, so that the
system has less leakage compact structure, and convenience for
assembly and disassembly
3, The output oil hoses are arranged orderly, clear and easy to
operate and install.
Main parameters
- Dimension and main parameters
Weight: 3 ton
Outside dimension:
The driving platform: 1400*2100*1600mm
The main oil tank and the valve control table: 2700*2050*2030mm
Driving power: 110KW
Auxiliary motor: 22KW low-pressure oil-supply pump is vane pump,
45V-75A
Auxiliary motor: 22KW, high-pressure oil-supply pump is A2F23/31
Maximum flow: 500L+500L
2. the main configuration and parameters of the test bench
Driving mode: by electric motor
Speed: 4 pole motor, 0—3000r/min ( using under 2300r/min is advised)
Loading mode: computer edition; both manual and automatic mode to
load pressure,
Mode of oil supply: self absorbing and by force
Mode of display: digital meter and computer display
Mode of operation: manual and automatic operation
3 working medium: ISOVG46 hydraulic oil
4. Volume of oil tank: designed 1250 L , 1200L in reality
5. The requirement of the cleanness of the oil:
GB/T14039 19/16(NAS10 grade)
II. structural characteristics.
1.
The electric motor is the driving system of the whole test bench.
This test bench can be divided three parts: electric motor
platform, oil tank platform, control cabinet. The structure has
characteristics of small size, light weight, compact structure, and
easy installation, etc.
2.
It uses the design of hydraulic integrated block, so that the
system has less leakage compact structure, and convenience for
assembly and disassembly
3, The output oil hoses are arranged orderly, clear and easy to
operate and install.
III Main parameters
- Dimension and main parameters
Weight: 5.1 ton
Outside dimension:
The driving platform: 1400*2100*1600mm
The main oil tank and the valve control table: 2700*2050*2030mm
Driving power: 110KW
Auxiliary motor: 22KW low-pressure oil-supply pump is vane pump,
45V-75A
Auxiliary motor: 22KW, high-pressure oil-supply pump is A2F23/31
Maximum flow: 500L+500L
2. the main configuration and parameters of the test bench
Driving mode: by electric motor
Speed: 4 pole motor, 0—3000r/min ( using under 2300r/min is advised)
Loading mode: computer edition; both manual and automatic mode to
load pressure,
Mode of oil supply: self absorbing and by force
Mode of display: digital meter and computer display
Mode of operation: manual and automatic operation
3 working medium: ISOVG46 hydraulic oil
4. Volume of oil tank: designed 1250 L , 1200L in reality
5. The requirement of the cleanness of the oil:
GB/T14039 19/16(NAS10 grade)
Installation instruction
1. After the arrival of this hydraulic system, check if everything
is is within the requirements. if the test bench meet the designing
request, and if there is any damage. Otherwise, contact the
manufacturer directly.
- When each part of the hydraulic system is installed, make sure that
the cover or wrap of every outside oil port do not fall off before
matching hoses for this equipment, to avoid any pollution of this
hydraulic system.
- After this hydraulic system is transported to the position for
installation, fixed it firmly, to avoid any influence to the
performance of this hydraulic system.
- After every part of this hydraulic system is at their
right position, match hoses for the hydraulic system according to
the hydraulic operational drawing.
5.When doing the connection work, do not miss or damage any seal,
